Need some size info for the maverick...

Discussion in 'General Maverick/Comet' started by BsMotorsports, May 10, 2005.

  1. BsMotorsports

    BsMotorsports New Member

    Joined:
    Nov 6, 2004
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Ocala, FL
    Putting together the car slowly and surely but I ran into one problem, I bought the motor and tranny seperate and Im having a hard time finding bolts to bolt the motor to the tranny. Does anyone know what size bolts they are? Its an 88 5.0 ho motor and a c4 tranny. I called ford and they said the parts are all discontinued and I havent found any auto parts stores that sell them. Junk yards are few and far in between here so any info would help, thanks.

    p.s. another question... Im still pretty young and trying to tackle this swap project, but as far as everything involved goes changing the 250 to a 302...Ive got the new frame mounts, motor mounts, front sump pan and new pickup, changed the intake to carb intake, new radiator, coil, and I hope that tops the list on the swap peices. Anyone in or near ocala that wants to lend a hand or give tips and info it would be well appreciated, thanks again.
     
    Last edited: May 10, 2005
  2. dmhines

    dmhines Dixie Maverick Boy

    Joined:
    Jun 24, 2002
    Messages:
    8,927
    Likes Received:
    21
    Trophy Points:
    147
    Location:
    Cumming, GA
    Vehicle:
    1971 Grabber / 2012 Mustang / 2009 Jeep Wrangler / 2013 Ducati / 2009 Buell XB12Scg
    I just used Grade 8 bolts and lock washers from Ace Hardware ..
     

Share This Page