Currently using 4 of...
When SPAM attacks.
I prefer Turkey Spam myself.
Is that a re-worked Dodge Challenger tail?
I recommend a BFH.
David, what is the "spherical bearing" setup?
IMO, the quickest and cheapest route is to buy a reman long block and toss your components on it. It will probably include some type of warranty....
15x7 with 4" backspace and 235/60-15 on the front.
15x8 with 4 1/4 backspace and 255/60-15 on the rear.
I may still have a complete 5 lug 8 inch from a Maverick if interested.
Where are you in Texas?
I believe the kit I used had a paper type of seal there. I applied a thin layer of rtv to both sides of the seal.
I recently replaced the seals on a leaking pump of mine. I did not want to replace the pump as it was working fine other than the leak, and it...
If you have a decent flare tool you could try to re-flare the female side before replacing the hoses.
Guy probably died and wife got rid of it.
I have had a set for a few years now, just make sure that when you install the spring saddles they mount flush to the arms....
Yes it is a 72 with a 73 stripe. The one in the background is a 75 Maverick that was rear ended and totaled, which lead to the purchase of the 72...
Thanks, that was a p.o. install, but it seems to fit the car.
15x8 on the rears with 255/60-15, unsure of the backspacing. 15x7 on the front with 4 inch backspace and 235/60-15.
Nice. What happens when you open the trunk?
Separate names with a comma.