The rear rim/tire combo works great. It's just the front I want to change. But i will have to change suspension parts also.
18x10's are really pushing it. I don't see them fitting without frame mods. But I would like a 275 on a 18x9.5. I believe this spindle will allow...
I have 255/35's on a 18x9 rim. I would like to get a 275 on a 18x9.5 or 18x10 rim. The auto cross is starting to look like fun.
2" is a lot considering it seems I'm really low already. This 1" would be perfect. I will contact Global West tomorrow. But all the info I have...
I already have 1" drop springs and I have already cut them down.
I just would like to know if it's interchangeable with our vehicle.
Will this spindle work with our cars?
Maier Racing has been working on a NEW 1″ drop spindle for the 1965-70+ Mustangs.
Available NOW~1) We...
Fuelish, that looks real good. Thanks for checking the clearance.
I will have to check on that.
Oh ok. I will try again. Maybe the suspension droops a little more. I will play with it a little more.
18x9 with a 255/35. I would prefer a 265 but I already have a 255. The backspace is 6" but the brake kit takes up 3/8". I believe 5.5" will fit...
I have seen 1.5" drops but I didn't know it made a difference on the ball joint.
I have never seen or heard of those arms. I will definitely do...
We don't have many Fab shops around town. So it may be hard to fab brackets for bigger brakes.
You are right. I did notice the steering arm also. The hub for the brakes pushes the wheel out 3/8" which will take up a little unneeded...
Fatman has a 2.5" drop. That's going to be to extreme I believe. My exhaust will be to close to the ground. Plus I would like to get 13" baer...
So my upper a arm will sit inside my rims. Right now the ball joint barley hit my rim. Im putting a wider/rim tire combo on the front.
I 2nd the WOW!
They only have them for Mustang II suapension
Good morning Frank. You are up early. I will give them a call.
Does anyone other than Fatman Fabrication make drop Spindles for our cars? Or maybe some that are interchangeable. I'm looking for 1" or 2" drop.
I cut 1/2'' out of it. Mine factory power brake rod was 7" long. I have manual brakes now.
Separate names with a comma.