[ATTACH] [ATTACH] $275 + shipping
I just installed mine to the rear.
What kit do you have and are you using disc or drum spindles.
Glasstek front clip with their pin on flat hood.
I will share with you my 347 build.
Stock 5.0 roller cam block .030 over
Scat cast crank and scat I beam rods
Probe forged pistols flat top 5cc...
Ford used a shallow and a deep starter.
What do you run for an ignition?
Where is the starter ring gear at on your flywheel?
Is it on the block side edge or on the edge closest the trans?
run a stock type mechanical pump with 3/8 line from tank to pump, -6 line to regulator -6 line to carb. The carb is an 850 preform out of the box...
On mine I just drilled the bolt hole that holds the 2 leaf halves together 1/2 inch farther back on the front leaf only. I did not re drill the...
The installed pics I have are in my media gallery, will post to thread when I confirm it is ok with car owner.
more pics posted.
The top of the engine side of the z-bar may not be a problem
with my AFR heads slightly raised exhaust ports, stock location may...
Separate names with a comma.