I set the seats in place, and marked where the bolts would go. Then drilled out the holes, and welded bolts in from the bottom and plug welded the...
It was black. Other than the hood, it seemed to be in pretty good shape, didn't get under and look at the rust though.
Found one in junkyard in Virginia Beach. 3F91L124634
Still holding at 14.5 volts at idle, 13.4 with everything on. The fuel gauge was some corrosion on the plug in the trunk. So for the inside stuff...
This is a new alt, only a year old. Power Master single wire, 100 amp. The original problem, was a huge voltage drop when anything other than the...
Of course you have to tighten the alternator belt back up after doing all of that work. I think I figured it out. :dizzy:
I may have missed it, but where did you get your alt from? I have a power master 1 wire 100 amp, with nothing on, it'll charge the battery up to...
I went with making a dash insert.
digital dash by jtown77 posted Sep 22, 2015 at 5:55 PM
If I remember correctly the fuel sender gets it's pulse from the voltage regulator on the back of the gauge cluster. It has a connection like a 9v...
I just haven't re-set the radio to green. It does something like a dozen different colors.
This. ....digital dash by jtown77 posted Sep 22, 2015 at 5:55 PM
You have a 69, so no glove box? any other mods that had to be done?
Thanks for digging it out. Bolts aren't an issue. Do you have a pic of how it mounts, alternator on top or bottom? pm sent
Finished other than clean up.
guages by jtown77 posted Sep 17, 2015 at 7:48 AM
painted bezel by jtown77 posted Sep 15, 2015 at 8:38 PM
Got it painted, hopefully get the gauges installed into it this weekend.
It's just 1/4" textured sheet plastic. I made a template, and cut it all out, then bent the sides. I used ABS dissolved in acetone, big pain to do...
Was jealous of those new gauge set ups. So I ordered some new gauges and started making the mods to the bezel.
Gauge cluster front bezel by...
Separate names with a comma.