I installed the AJE front end and the shock towers are cut out. The headers started as Hookers for a 351 in a fox. I had to move a couple tubes on...
Gary, how much does you car weigh? I kinda regret going with the 412, our 427 has been a 9.52 at 3300lbs in the Cougar. I'm not sure when I'll...
I'm actually still fine tuning it, it idles pretty high in gear. The ignition timing is locked out at 28 degrees. The cam duration at .050" is 278...
Here is an engine pic. [ATTACH]
Finally, it's been apart for the last 3 years. Hopefully the new combo runs well, shooting for low 9's. Dart 412 sbf, 3,850" stroke, 4.125" bore,...
Not really sure, I lost around 75lbs on my Cougar, but that was with removing all 4 regulators. I'm making a lot of changes. New AJE front end...
My headers are the same way, just drop them in from the top. Had to change the converter and trans last week in the Cougar for the Yellow Bullet...
Dad and I have been double entering the car everywhere. Equals more wins [ATTACH]
I tried the heat gun, doesn't do anything on the 3/16" stuff. I bet the 1/8" sheet would work better in the doors. I didn't want to spend a ton,...
Agreed. Mine is done, just haven't tested yet. I've been too busy with family life and racing the Cougar. Can't buy time, the 412 engine is done...
The front and back windows are screwed in, so it takes the same shape. The door windows are better if they are fully up or down. I moved the...
Nice work! The only problem I see would be the lack of adjustment. With my previous 400-500hp engines, my car liked the harder hit with the bars...
I have never seen them enforce it though. I'm sure it wouldn't fly at a divisional or national event, but I've raced over a dozen different...
If a cop is that close, I have bigger problems. It's gonna be different driving, I've had the windows tinted for the last 20 years. It was always...
No more glass, I used 3/16" MR10 Lexan all around.
Nice #'s
I just finished the window install. Since I still planning on driving on the street, I decided to keep the regulators. Here are the results...
The last time I put mine on the scale it was 3080 with me @ 230. That was with a full cage ( mild steel),fiberglass hood and bumpers, and a dart...
I've been 1.35's with this set up, hoping to go high 1.2's with the new engine. I've been running the Strange double adjustable shocks on my...
I relocated my shocks and are running QA1's. The shocks only cost about $150 each and have been working out so far. [ATTACH]
Separate names with a comma.