My son has factory Maverick disc spindles for sale on this forum.
I've used a nail before with the same diameter. Cutting the point off.
Yes, there is a pin in the rear main cap you must remove first.
Same here. Have there spring perches and lower control arms. Should have bought the entire kit as Shorty did.
Are you happy with the open tracker strut rods? Did they induce any further vibration into the car?
Don't run a full thermostat either. Have had to many fail. I cut the inner part out and use the rest as a restrictor. Do you know the overbore on...
Yes it does get narrower but not enough to prevent you from moving the tunnel brace.
T5 crossmember is not going to work with a TKX. If your willing to cut the spot welds out and move the tunnel brace back and reweld you can use...
My son put a TKX in his 72, used his C4 drive shaft after changing the front yoke to a 31 spline.
Agreed my son just put a TKX in his maverick with this setup. Had to add another washer to the pivot stud .200 total thickness. But now its perfect.
My son has what you need for the Brake upgrade. Spindles and caliper brackets off a granada. He works in Biloxi and Ocean Springs. He may still...
https://www.championradiators.com/3-row-Ford-Maverick-radiator-20-driver-1971-1977
[IMG]
I run 215/70r 14 on mine. They fit fine, I have 6 1/2" wide rims.
Sounds like you have a 200 6 cyl radiator. The 250 would have had the same size inlet as a 302. I'm sure a radiator shop could put a bigger inlet...
My son is doing this with a TKX. He cut all the spot welds out of the tunnel crossmember and moved it back just enough to clear the trans.
[ATTACH]
May want to check/replace the fuel filter sock in the tank. Those YF carbs are bad about the base getting loose and creating a vacuum leak. RBS is...
Dynacorn reproduction hood yes very good. But I cannot recommend getting it from Auto Krafters. Got mine from Melvins Classic Ford Parts.
Do cars still cruise Central on the weekends? Lived there in 79 and 80 while going to school at AAI.
Separate names with a comma.