Check your float level as well. Also, stalling when giving it gas could be an accelerator pump adjustment. Work the throttle with the car off...
I'm going to try to fix it this weekend.
Does anyone have a picture of how the climate control contact wheel is held in place? Mine fell out. I found a plastic grommet of sorts that...
I agree. I will never use them again. They were close to my house, so it was a quick trip with a barely tuned car running open headers.
Sounds good. Same issue here. I just disconnected my column shift linkage for now. Using the floor shifter linkage.
Good luck. I took mine to an exhaust shop for dual flowmasters 40s with x-pipe exiting behind the rear tires. I'm running Crites long tubes. When...
Moved bumper back 2-1/2 inches. Added HID headlights, turn signals behind the grill, and a billet grill.
Ugly bumper/broken grill.
Put a straight edge across your rocker studs on that side and make sure that one isn't sticking out further than the others. If it is pulling out,...
This. Just leave the vacuum advance disconnected and block of the line for testing purposes. Check total timing around 3500 RPM to ensure it is...
It sounds like a spark issue. You eliminated the carburetor already. Throw an HEI on it and be done.
Clockwise
I would check the modulator first. I would also check the timing and verify the spark plug wires are where they go. You should be GTG after that.
head holes have over an inch of thread. You should be able to go with 2" and be good.
Try NAPA. They have hardware in the back (at least here). I just give them the size I'm looking for and they go get it. It should only be 2...
Separate names with a comma.
