Project "Therapy Sessions" 1972 Maverick

Discussion in 'Maverick/Comet Projects' started by car-nut, Jul 25, 2010.

  1. car-nut

    car-nut Glenn

    Joined:
    Jul 2, 2006
    Messages:
    1,299
    Likes Received:
    212
    Trophy Points:
    146
    Location:
    conn.
    Vehicle:
    1972 Maverick
    So I have not been doing much on the car in the last few weeks. I am so incredibly disgusted with it right now its pretty hard to even look at! For the first time during this entire project I have been letting someone else work on the car in the hopes it would help me. Well, that didn't work as planned. The guy is a friend that has wired dozens if not 100 hot rods over the years. I don't know why now, or what has changed. But he is dragging this project out. Started wiring in early March, and it still isn't done! On top of that, look at this rats nest of wires!!!! So because of the delay I have missed my turn at the upholstery shop and that guy had to take the next car in line, understandably. So now I am to a point where I am about to rip all this out, buy a new harness and start over and just do it myself. Such ugliness I can't take it.

    This looks like an 8 year old did it.

    One step forward, nine steps back.........


    [​IMG]
     
  2. cool70mav

    cool70mav Member

    Joined:
    Sep 4, 2004
    Messages:
    103
    Likes Received:
    11
    Trophy Points:
    61
    Location:
    New Orleans
    Vehicle:
    had 1969.5, 1974 Maverick 2008 Shelby Gt Mustang 71 Lime Green Grabber
    Wow! Hang in there there is a light at the end of the tunnel not a train. You have done such beautiful work and have inspired a lot of people on this forum. I think you just have a bad case of the finishing up blues.
     
  3. mojo

    mojo "Everett"- Senior Citizen Supporting Member

    Joined:
    Jul 20, 2009
    Messages:
    5,250
    Likes Received:
    818
    Trophy Points:
    498
    Garage:
    1
    Location:
    Chicago
    Vehicle:
    73 Comet GT-302 4bl
    Yes it does! Nowhere near the quality of work you have put in the project. I feel your pain!
     
  4. Crazy Larry

    Crazy Larry Member

    Joined:
    Jul 16, 2005
    Messages:
    3,557
    Likes Received:
    603
    Trophy Points:
    287
    Location:
    Wichita, Kansas
    Vehicle:
    '73 Maverick 2-door, 302, manual trans
    Wow, I'm not impressed with your friends wiring at all. Sorry you are having to deal with this, but dont get discouraged. You are so close. :thumbs2:
     
  5. Miguel Arzola

    Miguel Arzola Member

    Joined:
    Sep 10, 2015
    Messages:
    302
    Likes Received:
    425
    Trophy Points:
    152
    Location:
    Long Beach Ca.
    Vehicle:
    1975 maverick Grabber
    Wow ? I hope you're friend knows about the spaghetti where he left the end..but remember can be done again very nicely it only material. ..
     
  6. Backtooldschool

    Backtooldschool Member

    Joined:
    Jul 16, 2016
    Messages:
    19
    Likes Received:
    0
    Trophy Points:
    9
    Location:
    Sweden
    Vehicle:
    Maverick 1972
    Is the seats from Ford Explorer?
     
  7. car-nut

    car-nut Glenn

    Joined:
    Jul 2, 2006
    Messages:
    1,299
    Likes Received:
    212
    Trophy Points:
    146
    Location:
    conn.
    Vehicle:
    1972 Maverick
    No, they are from a 1989 Mustang GT.
     
  8. franktf

    franktf Member

    Joined:
    Nov 12, 2009
    Messages:
    4,119
    Likes Received:
    336
    Trophy Points:
    206
    Garage:
    1
    Location:
    Pinellas Park, FL
    Vehicle:
    72 Mercury Comet
    That must be the same guy that has wired most of the cars we get at work.....

    I just worked on a 69 Chevelle last month that had the correct Painless kit in it, put in by maybe an 8 year old..... Just to give you an idea the instrument cluster had 22 butt connectors in the ground wire alone.....


    It's a shame people do stuff like that, specially when it's some one you know.....
     
    car-nut and Crazy Larry like this.
  9. car-nut

    car-nut Glenn

    Joined:
    Jul 2, 2006
    Messages:
    1,299
    Likes Received:
    212
    Trophy Points:
    146
    Location:
    conn.
    Vehicle:
    1972 Maverick

    Yes Frank, It's killing me to look at. I could have easily done it myself. But I have seen some past work of his, and my thoughts were that I could kill two birds with one stone by having him wire while I did other things on the car.

    Big mistake!
     
    Miguel Arzola likes this.
  10. CaptainComet

    CaptainComet Large Member

    Joined:
    Mar 18, 2007
    Messages:
    4,981
    Likes Received:
    433
    Trophy Points:
    413
    Location:
    Clearwater, FL
    Vehicle:
    72 Comet
    Well, the good news is that if everything works, you just have to shorten each wire by about HALF!..... geez!

    He was probably getting frustrated because these dash areas are pretty tight. Give me my 71 Torino back ... I could stick my whole noggin up under the dash and still have space to work on it.
     
  11. RMiller

    RMiller My name is Rick

    Joined:
    Dec 12, 2009
    Messages:
    4,124
    Likes Received:
    1,154
    Trophy Points:
    523
    Garage:
    1
    Location:
    Kennewick, WA
    Vehicle:
    1971 Maverick Grabber
    I really enjoy the wiring part, if I was closer I would volunteer to clean that up for you! Unfortunately it looks like a 41 hour drive so I won't be able to make it.

    Worst vehicle I have wired was a 60's CJ5, no room behind the dash whatsoever! I am looking forward to doing the Maverick though, it will be the first car I have wired that's mine. I get to take my time, do it the way I want to without input and last minute changes by the car owner. As long as I am left alone to work in silence it will be bliss!
     
  12. car-nut

    car-nut Glenn

    Joined:
    Jul 2, 2006
    Messages:
    1,299
    Likes Received:
    212
    Trophy Points:
    146
    Location:
    conn.
    Vehicle:
    1972 Maverick
    I have finally gotten far enough in the build to get the car out for exhaust! I am a few months behind schedule as I had really wanted to have the car at the Suracuse Nationals in early July. Clearly that didn't happen. Oh well, it will be done when its done I guess.

    Here is the car peaking out into the sun for the first time since last summer when I painted it. Now its a car!

    [​IMG]

    [​IMG]

    [​IMG]



    Ready to get loaded onto the flat bed for the trip.....

    [​IMG]

    [​IMG]
    [​IMG]

    [​IMG]


    This was a bit heart wrenching. Like watching your first born get on the bus for the first day of school.
    [​IMG]

    New 2.5" steel exhaust custom bent. Very tight to the floor and neatly done. Flow master 40's on there too. I will be taking this all off this fall and have it HPC coated.

    [​IMG]

    And the guy that did the exhaust is friends with former pro wrestler Bob Backlund. Looks like he likes my car!!

    [​IMG]
     
    CaptainComet, JoeB and Crazy Larry like this.
  13. Crazy Larry

    Crazy Larry Member

    Joined:
    Jul 16, 2005
    Messages:
    3,557
    Likes Received:
    603
    Trophy Points:
    287
    Location:
    Wichita, Kansas
    Vehicle:
    '73 Maverick 2-door, 302, manual trans
    Wow, those pictures get my heart racing.
     
    car-nut likes this.
  14. cool70mav

    cool70mav Member

    Joined:
    Sep 4, 2004
    Messages:
    103
    Likes Received:
    11
    Trophy Points:
    61
    Location:
    New Orleans
    Vehicle:
    had 1969.5, 1974 Maverick 2008 Shelby Gt Mustang 71 Lime Green Grabber
    (y)(y) If that's not a show winner nothing is. Glad to see you have made it his far. I bet you can't wait to drive it for the first time. Your car looks amazing. You do top notch work. I look forward to your post. Thanks for sharing with us
     
    car-nut likes this.
  15. car-nut

    car-nut Glenn

    Joined:
    Jul 2, 2006
    Messages:
    1,299
    Likes Received:
    212
    Trophy Points:
    146
    Location:
    conn.
    Vehicle:
    1972 Maverick
    Thanks!!!

    Thank you! Been a long, slow road. Thanks for following along.

    I am heading over to his shop today to put some gas in the tank and fire it up for the first time! Video to follow later today.
     
    RMiller likes this.

Share This Page