Simply Googling the number tells you it's a 600cfm model 4010. It's not the best carb for your application. I wouldn't recommend a double pumper...
Yep, but that doesn't address the rate it takes to get to 6000 rpm, which is the whole point with performance parts. Mavman is spot on.
Is fuel injection superior? Hell yes, that's why no new car has been manufactured in the last 20 years without it. Is it cost effective to...
Not around? No way!! How could a company like that go bankrupt!! TL, until you give the Pinto guys the proper respect, you need to reign it in a...
Of course, more resistence means less spark. I think most people know that. And that is definetely what the ignition companies keep telling you....
There is a reason those heads are cheap, and it isn't because the seller likes you. It is really hard to make good horsepower cheap. Most people...
I disagree with NADAs numbers. We had a member here with an EXTREMELY nice 4 door V-8 car that couldn't even pull 2 grand. Fat chance getting over...
While there is a lot of fuss about ohms and resistence in plugs wires etc, I am not convinced it matters all that much. The plug gap is tens of...
66 heads on a 347 would be a complete buzz kill. They will not flow enough to get the benefit of the 347. Consider aftermarket or sticking with a...
Sell it here to someone with an AC car.
My Pertronix I triggers a Flame Thrower coil that says it is 40,000 volts. More than enough on a 393 that sees 6500 rpm regularily. YMMV...
A lot of people are concerned that these will fail and leave them stranded, but the reality is that the coil will fail 100 times to one time for...
Reading plugs is pretty difficult these days. Unleaded fuel doesn't tell you as much as it should. Either find a local race gas shop and buy...
Pertronix II requires 12 volts, and most people who have problems are running through the resisted Ford factory feed, which is usually 8 volts....
Pertronix really doesn't put out power at all. It is merely a hall effect switch that replaces points and a condenser. It is the only option if...
Bad idea. It's an old trick but misguided one. You are guessing on the proper size of the hole to drill, and if you go to far, you can't fix your...
Separate names with a comma.
