The 66 C4 may have a 24 spline input shaft and will not work on your converter if your present one is 26 spline. Can be changed to 26 but is much...
Went through the same senario with the 331. Found the plug gone and replaced it. Figured I'd look at the bearings too, but only had a few race's...
28x9x15 slicks are a good combo on 8 or 9in wheels. Depends on engine mod's and 1/8th or 1/4mile track. Had 4:11's in the Mav when first built...
Thank's guy's, not only did we do good this year, but the trailer is like new and has new tire's and brakes. Torsion bar suspension and generator...
If the heads are off and piston and rod on #1 are intact, you can bolt a solid bar or the like, with a drilled and tapped hole in the center for a...
Just got in from the last race for us. Deer season opened and took a toll on car count. Mavman did not want to race, but I did, so he crewed for...
Awards and final results will be tomorrow during last combo race. Did some calculating on various makes and models of cars in the top ten of...
Loosen the bolts and nuts that hold the four arms to the plate. Position the plate assy. on the rear of the block where the trans bolts. Two top...
Jerry, also get the tub kit too. When helping Todd do his, I thought, what are we doing? We had little experience with doing this type setup but...
Have replaced regulator, alternator, etc. Turn on headlights and they pulse bright, dim. Also show's on ohm meter, on any hot wire, any idea's?
Something does not seem right on those. May be an early production, but with one missing, don't know if you can get the same thing in replacement....
I also use them in my 347, no problems so far. I think the issue Mavman is concerned about, is the weight of them compared to Mahle's, strictly...
Broken Eagle Stroker Crank May it rest in piece's.
Windsor rebuild for the Mav. The broken Victor head(think I had said it was an RPM) is due to guide plate and rocker stud breaking. Even bent the...
Had a great day at Memphis Friday, saw some great friends and a lot of awesome racing. Got home around 1:00am and then up at 4:00 to get ready for...
Broken crankshaft, split mains/block, pry the crank back and forth to check the wear on the center thrust bearing. Usually they will not vibrate...
Went to the track last Saturday to prepare our cars for the labor day resumption of bracket racing. Everything was going as planned, oil change,...
I have just finished building a 400 for my son, who is in Iraq. Put it in a 78 two wheel drive. Has Wiend intake, Holley, Comp Hyd. cam and roller...
Sound's more like a brake problem to me. Wheel bearings usually make a clicking noise and/or grinding etc. If you have drum brakes, you may have a...
Just got back from Russellville Arkansas. Go up every now and then to bench race and such with the local racers, who own a parts store of the type...
Separate names with a comma.
