Whats the number in the top left corner?
The tires are probably out of balance.
I would save any parts that are still good.
Use fel pro 9333pt-1 head gaskets, they have a stainless steel fire ring where most others are tin. They are also cheap $40 for a set, and most...
If it's going to be a stock or mild build you'll be fine.
I would pay the extra $20 (or whatever it is) to get it from summit. There are knock off versions of this pump, so beware.
If you already have a fuel cell just get an inline walbro 255lph pump. They're cheap and reliable, and it'll give you plenty of room for...
If your drum spindles are 74 and older then yes. In 75 they used a larger tie rod end.
Clean truck, love the 2 tone but I may be biased. I saved mine as well, bought mine from the wholesale lot at the dealer I used to work for. Mine...
My truck will not spin the tire in a straight line, don't know if its cause the engines tired 233k, or cause the 3.08 rear. I'm planning on a...
If I run the H.O. cam should I run 1.7 rockers or stick with 1.6's? I may go to 4:10s later on, 3;55s more likely due to availability in the junk...
http://www.summitracing.com/parts/edl-3881/overview/ Intake mentioned in post #4.
Trans is a 4r70w I asked on a truck forum, no answer, a search shows few guys running the above linked cam but all were off road trucks. My truck...
I'm going to ordered the heads next week. I'm also looking at a edelbrock intake, don't remember the model but it's made for the mid 90 ' s truck...
Anyone???
I'm building a 5.8 efi for my 95 f150 with a tired 5.0. It's a 95 5.8 roller engine completely stock(I believe it 9.1:1 static compression). I'm...
Got a VIN t the junkyard today 3K92L135407.
If it's on the driver's side it's where the dip stick went. You can get a plug that will hammer in, tap the hole and put a plug in it, or use a...
Ldo stands for luxury decor option.
Sounds like its running lean, or has a valve issue. Have you checked for vacuum leaks? Have you hooked up a vac gauge? If you have a bouncing...
Separate names with a comma.
