No experience with replacing the bushing, but it looks like you could press it in/out with a ball joint press.
I hope you are using an aftermarket block, cause a ford block wont live long with an engine making 500hp then adding a blower! As for the heads...
Called my friend yesterday, it was acetone.
Here ya go, This is from Harbor Freight, but you can get these from any auto parts store....
You need to let the mineral spirits dry after draining it out no rinsing, at least thats what we did. I should also explain "let sit" takes a day...
A friend of mine and I just resurrected a '70 Jeep j4000 that the inside of the tank was like how you describe. We used mineral spirits from a...
Tdc= top dead center. Follow the instuctions in this video, its for a sbc but the concept is the same for all engines....
Did you set the engine on tdc, and put the dist. in pointing at cyl 1? Sounds like the timings off.
I basically copied a 1-2 of the original lines, most of them I just winged it. I put coils in the lines off the master, I put them there for the...
You can, but it should be done on a drill press. The holes also have to be counter sunk to keep from eating the pads. As far as structural...
If the nuts are off the axle retainer install the drum backwards, but only thread the lug nuts on about 3-4 threads and pull towards you. The...
My 73 has these crappy shoulder belts that have to be manually hooked into the lap belt, and they're non adjustable. Someone probably removed them...
If you guys want to get technical they're actually core plugs. They are put there for block casting, they were not designed to pop out if the...
I had dynomax ultaflow mufflers on my car, they sounded great and are one of the best flowing mufflers as far as i know. [media]
The brake light switch is located on the brake pedal, completely separate from the turn signal switch. Sounds like your gonna need and new brake...
Spotted a maverick at 1:58. https://www.youtube.com/watch?v=_0oqmTHE7kg#t=118
Can you push down on the back of the car and duplicate the noise? If you can have a helper push on the car while you look underneath to find the...
I also think it looks better painted on your car, but may be do to it having 73 bumper mounts. It looks like it hang out to far, where as the...
I have a later model starter could be why I didn't have to move mine.
You can get it out with the pump on. I get mine off mostly the same way, I loosen the sway bar from the frame but leave the links connected but...
Separate names with a comma.
