Hey Chip, The originals butted up against the trim. I have never seen any that slide under the trim. Do you have a picture of this step?
That vacuum switch is the old all metal design only found in the 70 model. Hard to find and way more durable than the plastic ones. Can be used...
Send me an email. I have several. Mavaholic@me.com
Finally called them to get some connectors to wire a ground for digital flashers. They are sending me what I need free of charge. Great customer...
I bought the Kwik Wire 20 circuit budget harness. I'm in the process of installing it now. I looked at a bunch of them and decided on Kwik Wire....
Back in 99 when I converted my 77 Maverick to small bumpers, I reused the wheel well trim. Its aluminum so it will bend enough to work.
Mounted AC registers to a standard package tray. Cleaned and painted.[ATTACH]
Working on the dash.[ATTACH][ATTACH]
I bought them many years ago from a bearing place in Baltimore but here is the package.
One of my favorite tools. I've used it on quite a few different projects for this car. AC, trailer hitch, R&P steering, and the clutch linkage....
Going with a keyless ignition system. Modified the column to accept the push button where the key would go. Removed the key and lock tumblers....
Well I gave up on the Holley. After many suggestions and a few calls to the holley tech line nothing will fix this problem. It is definitely in...
I will check all this out tomorrow and get back. Thanks.
Got it idling nice at 850, in gear. Manifold pressure right around 10". Only problem is jumps up the 1550 in neutral. 700 rpm seems like a lot of...
From what I've researched, the power valve has nothing to do with idle. Tomorrow I will pull the carb and check the secondaries and while the carb...
I have a 57 Wagon with a 400M & C6. The 400 does have a cam although the drive train was in the car when I bought it so I have no specs. Anyhow it...
I would think it would depend on the medium you use with the water. Sand is definitely the worst. When I sandblasted everything, except the...
Just drill through the trunk floor and attach with long bolts or all thread.
Finished putting my rear axle together. Going to keep the 2:79 gears for now. Looking for economy more than anything. If its too much of a dog I...
http://newvintageusallc.mybigcommerce.com
Separate names with a comma.
