Well after 9 years and 8 months I finally got around to putting some paint on this thing.
Need all this fender trim for the drivers side on an F150. Let me know what you have plus shipping to 32060. Thanks
I would have to doubt that because seeing how they are built you would have to keep the tank at least 3/4 full all the time to keep the pump fully...
Thats what it turned out to be. Bought a fuel pressure gauge and key on, engine off, pressure was 15psi when cold and 7psi when hot. Had to do...
I believe I have a set of cowl ends I cut out of a car a long time ago. If your interested in them I will hunt them out tomorrow and see if they...
I have a 96 Bronco with 5.8 When cold, it starts and runs great. After reaching normal operating temperature, it still runs great until I shut it...
We are leaving early Wednesday morning to head up there.
I put a 650 on my Sprint back in 2002 and it works great to this day with no maintenance issues.
Back in 2002 I bought a red top for my Sprint restoration. It was still in it and working in 2013 when I replaced it. The only reason I replaced...
If you have a little welding skills, replace the Maverick tank with a Mustang tank. It centers the tank and moves the fuel pickup to the front of...
The cost of tooling up for full quarters would be astronomical. A long time ago when I had several OEM quarters I talked to AK to see if their...
I built that maverick back in 1999. I wish I would have hung onto it. Sold it to a friend of mine back in MD.
Car looks Great!! One of my favorites of all times. One idea you may or may not like is to paint the argent part of the headlight doors body...
Finished and primed. [IMG] [IMG] [IMG]
Once that all set up I cleaned and glued the end caps to the quarter panels. Then it was just a matter of shaping everything. I used fiberglass...
For the end caps I cut a slot and drilled a hole to blend in more 3/8 rod to match the trunk. The hole was 15/64" so that 1/4 rod would be real...
This is the finished trunk lid and mounted with a stock spoiler end cap. [IMG] [IMG]
To get a uniform curve across the trunk lid I traced a french curve onto a piece of 14g a metal and cut it out. When I got the desired curve, I...
I cleaned up all the areas where the spoiler touches the trunk lid and glued it down with 3M panel bond along with the stock hardware. [IMG] [IMG]
Next I folded the end tabs over and pop riveted them to the spoiler. For the center, I welded a plate in to cover the hole and help lock the...
Separate names with a comma.
