Over 800 miles each way for me. I considered it as there are some Cougar fenders that I was considering buying.
Have always wanted to go but just too long of a trip for a weekend.
Maverick ball joints. They may even be the same part number.
Very nice! Would like to hear your thoughts on both suspension designs and how each handled.
You mentioned Crown Vic Disc Brakes, is that what your trying to remove. If so you have to pull the rear cover off the 8.8 and remove the pin and...
Clean up any corrosion inside the end of the axle tube and on the bearing, replace the axle seal while you are at it. Everything should just slide...
This is assuming that you are working with an 8 or 9 inch rearend. Once you remove the 4 axle retainer bolts and remove the axle , the plate...
You could do it with a dremel, it is only and 1/8 inch all around
Yup on a 76 there should be a place where the retractable belt assembly attached to the inside of the rocker area. A bolt hole on the side of the...
Every Maverick and Comet sold in the US came standard with lap belts and shoulder belts.
Wonder if the outside ring on your harmonic balancer has slipped.
Ford used 3 different sets of timing marks on the 302 over the years. A mismatch of parts will confuse you. Best thing to do is set the engine on...
I would run new hard lines regardless. Only use rubber fuel line in short lengths to make a connection. You could run braided stainless but that...
Stay with a mechanical pump. No need for an electric on a 250.
Would love to but it is not to be this year. Thomas will be enrolled in a summer class as well as taking his PCAT on July 17th. So we will not be...
I have the Harbor Freight tool and it worked great. Have only used it 4 times though
Oddly enough my car and zinc4v's car are 7 numbers apart and we are both in the St. Louis area. Mine was purchased new from McMahon Ford in St....
It has been on there for 44 years it may not give up easily. :) But the splined shaft should just slide out of the raq joint.
Welcome fellow Missourian!
Go with what you like. Doesn't really matter what others think.
Separate names with a comma.
