On the later dash, yes they are machine screws, but on the early ones they are sheetmetal screws. I got mine in the help aisle in a random...
I'm right there with you. Looks like you are doing a fine job to me Frank. :thumbsup:
Dangit you beat me to it. Frank, that's an awful lot of one color on two large panels. :D
That might be too much backspacing in the front for a full turn.. I know it was when I test fit some 235-60-14's on a 7" rim with 4.25"...
I used 3-point belts with a shoulder extension from Andover Restraints. The drop does really make a big difference. Even so, as was just...
At the very least rotate the clamp so the head of the screw can't make contact with the hose.
Heh, he still spent a small fortune on his! :D
I got a read to run C4 from a junkyard once. Came out of a near perfect 77 4-door. Had already been unbolted from the motor for me. :D
Oh you mean using the combination with the v8. I kind of remember something about that.
Dude, somebody took a dump on your crossmember. :D You say that about the motor mounts like you're keeping the six. You're not keeping it, right? :)
Trailer miles don't count. :rl: I would think that just like any other paint, the prep is key. Or not. The spatter paint in my truck didn't...
Going to finally install the anti-rattle clips? I've been saying I need to do that for at least four years. :D
I don't see one...... :wrongforum: :D
Hmm that compressor says "Motorcraft" on it. Didn't know they used them on Chevys. That's a Granada (or Monarch) A/C bracket and compressor I...
So I take it then you aren't going to reinstall the screws at the front of the dash at the base of the windshield? You have a plan for those or...
It's the socket (harness really) that's wired that way, not the bulb. You may have understood that, and I mis-understood your post, I which case,...
At this point I have to recommend against using March's Ultra series brackets for A/C.. The A/C bracket is junk.. (This kit specifically:...
Also note that not all Grabbers had that relay. For cars without it, the sport lamp wire goes straight through the bulkhead connector to the front...
To be honest I'd pull the dash back out when you get ready to install the heater box. It makes it ten times easier. It is far easier to remove and...
Sat in mine. :D
Separate names with a comma.
