As Dale says, thanks to the Hahn brothers and all those that helped out. It was great to see everybody I know and to meet a few new faces. I had a...
Roundup All, Glad to hear everybody made it home safe and sound and you had a good time while you were here. It was a blast putting on the...
I am running 215/60 x 15's in the front with no issues. Also 255/60 x 15's in the rear. Lee "THE MAV" Richart:2thumbs:
You might want to try tucking the front bumper(moving it closer to the body). I cut 2 1/2 inches out of the mounting bracket and then welded it...
Autokrafters carries a set for putting a 351 Cleveland in a Maverick which is very similar to a Boss 302. They may hang down a little further...
Count me in, although my 351 is on steroids. I have done this swap three times. Lee "THE MAV" Richart
I too have Hagerty and have had two claims. They settled both with no problems at all. My agreed value is $15,000 and all it required was a few...
They may be Comet or Maverick, but real LDO seats should have head rests and a chrome lever at the base of the back rest for the reclining...
You need to get some gauges on that car so that you can work with real information. Temperature and oil pressure at a minimum. Even a cheap set...
Yes, Mark just keeps coming up with new stuff. His current short block is the 357 that came out of my car when I replaced it with the 421W. The...
The only big construction problem is Southfield Hwy.(M39) is closed from I-96 to M-10(Lodge). It is open one lane only I-96 to Ford Rd. South of...
I expect to be there with my oldest son. Lee "THE MAV" Richart:2thumbs:
I am using Tubular Automotive headers which I got from Autokrafters. I have heard that Crites will work, but have no experience with them. As long...
I have done this swap three times and have yet to cut a spring tower. It just takes a light caress on the headers with a ball peen hammer and...
You might want to try fabbing a different bracket that would bring the cable under the crossmember even if just temporary to see if that is where...
Be sure that the lever on the trans. is about 90 degrees to the cable when the trans is in neutral and that you are using the correct lever from...
You can get a nice pair that fit from Rudy Bidlack, who advertises in the Shorthorns. I have a set on my car and they fit very well and were only...
You might try a six cylinder cable. When I first swapped in my V8, I used the one from the six and I am sure it was longer. Lee "THE MAV"...
Hi! I am running 15x7's front and rear with no issues. I have slicks for the back on 15x8 wheels and they are close. I am thinking my backspacing...
If you want to seem stock and make good power, stroke it and use a mild roller hydraulic cam. I have a 351W stroked to 421 that idles at 800 rpm's...
Separate names with a comma.
