Timing gun is funny !!
It also has speed, RPM and tire size calculator, there are angle finder apps, analog and digital angle tools but then you have to do the math
Well I have figured out why I was having trouble getting my alignment correct, the Unisteer R & P is a center take-off setup, with this style is...
Download the Tremec app for smart phone, follow the instructions on checking the three angles, pinion,driveshaft and output, it will tell you when...
Headman 88300 fit very well, cannot comment on power steering fitment
That is a mystery indead
Well sorry to say that it worked and worked well, the dent happened by downward force correct, the reverse order would be upward force while...
I had same issue with mine and almost same location, what I did was put slight upward pressure from bottom by using a 2x4 with a piece of plywood...
Yep I believe you got a cheap china gasket, got mine from CJ pony but came with sending unit no issues
for some reason these alignment guys like more toe, I have calculated the degree equivalent to 1/16 and 1/8 so I will have it set at 1/16 to begin...
thats in degrees and if you convert that to inches its way too much
I did the same thing installed a smaller flow valve which did help somewhat
it was just a thought the only things I run ethanol fuel in are the fuel injected the rest get premium, I do know some chemicals, alcohol etc....
I did ask and they responded that they could only recommend stock settings and would have to experiment from there, I was hoping to keep from...
I will, and I do like it but believe where the problem arises is the quick ratio so I am attempting to tame it down a bit so may bring the toe...
stock caster is -.5 to +1 is that correct, is that what you are at because I shimmed my upper and now at 3.5 and was at 1.5 before and seemed...
Just a thought did you get ethanol gas ?
Looking for advise on good alignment specs, I know it has been asked a hundred times, but I have the Unisteer rack and pinion which is a rather...
I do love a good mystery, but I think this one is solved
if the converter bolts hit the cover I doubt a spacer will help, I have seen several of these when taking a stock engine out and were always on...
Separate names with a comma.
