dont know for sure but with the hot wire connected to the coil with the ign on there may be a small voltage drop at that point. the pertronix coil...
That would make sense
you installed a relay for the coil and have 12 volts in to relay and 12 out but 11.3 off pos side of coil is that correct
You need a full 12 volts for the pertronix, I run my coil and electric choke off relays one for each used original coil wire to trigger the relay...
that's funny because I found one of those on one of my Fairlanes years ago. haven't seen one since
I can tell you from experience that the headman 88300 will fit and that the hooker 6901 if I have that right will disappoint you,Have installed...
Pitman arm was not an issue with mine, but have since converted to R & P, it took a total of 5 minutes per side to get the hedman headers in...
it's actually very easy, tape up the jaws of an ordinary pliers with duct tape and gently pry in an upwards direction a little at a time working...
http://www.pro-touring.com/threads/62598-Project-quot-Boss-5-0-quot-or-my-72-Maverick!!/page16 Its a long one with lots of pics awesome build
I seen a build thread on that on a pro touring forum but don't recall exactly, I will try and find it. anyway someone shaved the drip rail on a 73...
Cant say I have ever ripped out my seats to relieve stress, but have done plenty of other things that I wont mention to protect my innocence ( had...
I have the same intake and started with an HEI and there is clearance issues, had to do a little grinding on the intake, but have since switched...
you may be able to get the tall chrome covers to clear. aluminum covers are thicker obviously which also makes them taller, worth a try
you need to use the gear that the cam manufacturer recommends, I too have not heard of different gear pitch, the main issue with the ford dist....
I wouldn't say that, if it solves a problem and works it's worth it. about what the cost of a good floor shifter cable is.
I did one on a Fairlane needed the bracket and arm from a v-8 model was all the headers were not a problem. If I remember although was years ago...
Started removing my upper control arms, with plans to upgrade or modify them
From where I'm sitting it looks really good, I'm also impressed with the packaging. I am curious though what gauge metal they use as compared to...
Just curious, in my opinion you cant beat felpro
Yes if thats the case you may have warped head, what type/brand gaskets you use?
Separate names with a comma.
