In general they should be parallel at fullest load, and slightly not parallel at rest. Which is why the effect of the cal-tracs on the axle wrap...
The holes have to do with the timing of when you punch the gas to when the fuel expels from the jets. Seriously......
All of that was the tipping point for why I stayed 2 barrel. So much simpler to tune a 2-barrel for minimum fuel than a 4-barrel for freaking...
I might wander down. Darn thing is the same weekend as the rent check is due this year though and I had to blow my car savings on 2 new(to me)...
Yea that pink cam is for your basic duty street applications, and out of the box Holley carbs are de-tuned to be able to run on almost any...
Can I just say from a casual perspective, my first thought was why the frack is he running the pink cams on that, those aren't for what he's...
I was just saying, I hate cleaning up used parts. If someone else wants to clean them up, and they did a good job, I'm happy to consider...
That's the track I try to take to be honest. After working in reconditioning parts I try really hard to not use used stuff. Just too many nasty...
Another thing is, if the car was driven frequently between oil changes, the baked sludge would be *thinner*(but could still be layered pretty...
I always assumed they just didn't want to buy that many types of wire. Then I was pictures of a 68 mustang with a 3rd Gen alternator upgrade and a...
I wouldn't be super concerned about it. It probably got that way from not being driven and the oil sitting and turning to sludge. Most people...
I'm a sasquatch everything looks small to me; but I helped run out some high tension power line once and that was one of the most frightening jobs...
I found it to be 16 AWG in a 14ish sized shielding for extra heat protection. I wouldn't use 18 though, it will exude a bit more heat and that's...
I was told it doesn't matter when I did mine. The new radiator I had purchased had to have connectors installed to match the existing lines on my...
Because it's a bit more complicated than that, and ported vacuum + Holley carbs is a recipe for a carb that never runs right. Tuning a Holley...
I had true duals all the way out the back with mid-range flowmasters put on for $425. It was also the only exhaust shop that was willing to...
You can have a fault in the switch such that everything works, but it acts like there is no battery hooked up to the system. If you jump it,...
I'm gonna come off as a dick posting this but those pics are bugging me. You need to be careful when you photograph NOS chrome parts. You cannot...
Go to a junkyard, get some spare coils, and do some cutting? Can you still test that way after that rack swap? Looks like an 1" and a half to me.
Doing steps 3-6 on my 74 when I first bought it was enough to make it go from meh to WOAH on the ol' butt dyno. Heck ever since I wrecked it my...
Separate names with a comma.
