the C4 should run at 170F maximum for the longest life. The minimum temp should be high enough to get any condensation out of the oil so around...
When a cam is designed to be used from 2400 (or 2200) rpm to 6000+ it should tell you that it will not work for the street unless you are going to...
"Dynamic compression" is only low at extremely low rpm. As the rpm increases the compression goes up until you reach just over your peak torque...
If you think about it for a second or two you would realize that you are connecting two ports with the same pressure. there can't be any flow...
To run power tools you will find that a compressor that puts out 12 cfm will be marginal at best and only provide about 5-7 minutes of sand-blast...
If you do have the converter seated properly then it will be below the mounting surface if it is the right converter.
If you got leakage then there is a problem - were all four sealing rings for the clutch packs replaced?
How about I pull mine off - less than a year of driving on it - ans sell it to you at the dealer price of $100 and only $50 postage and handling?...
The @1 mistake most people make with their first C4 rebuild is not replacing both seals for both clutch packs. there is one on the apply piston...
When I checked the applications it said it was not compatible with a 1973 Maverick. I guess I'm out of luck. I will have to keep the $15 Moog part...
Normally the 302 pushes hot water from the fron to the intake through the heater and then back into the water pump where it is recirculated...
Has anyone reported this to champion? They can't fix it if they don't know about it. Let the supplier know!
did you fill the transmission with the engine idling in Park? Have you checked it since? Who rebuilt it? will they look at it to solve the problem?
Bleach does not kill mold. Pure bleach is only 3 - 5% sodium hypochlorite and the rest is water. Mold neads water so you begin by completely...
Frank, Why are you taking water off the rear of the heads where it comes of the rear of the block to go to the heater? The coolant picks up most...
I did mention good parts - standard Blue streak works well for me. My cars are daily drivers. Leave the ignition on without starting the car and...
Well, good parts properly installed in a points type distributor will run well for two years as long as the dirtributor breaker plate is not worn...
The safest thing to do is ask the builder - or in this case the supplier of the parts. I know that Jay is fairly flexible in what fluids to use...
There is an ID number stamped in the block behind the starter - that will tell you about what you have and what year it is. There are too many...
NOTE: the rubber hose you select has to be oil line rated to take the pressure and temeratures of the oil. Do NOT use fuel or vacuum hose - it...
Separate names with a comma.
