MGChevyFordparts and Scarebird use the Hubs from our Mav/Comets Front Brake Drums (which are pressed in) and then uses the Toyota 10" rotors, thus...
He basically uses the same Toyota 10" disc set up that Scarebird uses in his kit. Hubs are OEM Ford unit, same as what came with our Front Brake...
Try contacting this fellow, he might be able to help with missing Caliper Mounting Brackets......... p/n: MCB.3...
OK, Craig beat me to the pictures! May look the same from top view, but side view shows difference, which makes sense, as you can see in 1st...
Both MS and PS pitman arm look exactly the same, the difference is with their tapered hole, which are opposite between them.......picture is with...
His is an Export Brace and does not have a Monte Carlo Bar, which is tied in front of the shock towers, like member Shorty (Bruce) in post #29 David
[ATTACH] David
Hi Everett! The Monte Carlo bar I used was for 65-70 Mustang and I had to lengthen it, which you see in the picture, it was a curved version...
37 some years ago when I first began suspension mods on my 74 Comet, from what I learned from my 65 Mustang, I fabricated both Export Brace...
Just PM you........ David
Your best bet would be to go with later 75-77 PS set up, just like what Tom did on his 72, all parts are available new. Here is one:...
Yes about the center hub and as far as I know, all 5 bolt studs are on 4 1/2" circle. David
I think you are correct, went from 2.43" to larger 2.78" hub diameters........ David
http://mmb.maverick.to/threads/boss-302-maverick.123112/#post-1158569 David
How you checked the crank is basically how Tom Monroe does in his book, if you are within .004" all is good for you "budget" build, would...
What did the same #3 & #4 bearings look like on the block, where they worn down to copper too? Do you know the mileage on the 71 Torino block? I...
Bearings #3 & #4 already worn down to copper, so only matter of time before something would have happened, you probably saved the crank! Just...
Hi Stu! Even though the crank journal looks nice, I would still have it checked for "roundness" and/or if needed, ground and polished.......have...
I figured maybe because my 74 was made at the Kansas plant, was a shortage of USA/Canadian blocks so they used ones from their Mexican foundry?...
Separate names with a comma.
