With just a 6 point & sub frame connectors & decent traction bars you will get better launches.This will make your 60fts improve because no more...
If you are going to race quite a bit you did the right thing,I have seen cars with ruptured fuel tanks burn up & it is not a pretty site...
460s make so much torque that with the right tire & gearing at 3000lbs breaking low 10s will be a breeze.Also you don`t have to turn a lot of rpm...
The only other problem w/ drop spindles is to make sure you get the correct control arms so you can set your caster & camber.
I`d follow Robs advice & throw all that stuff away,what would happen if you took a hard corner at 70 mph & it broke,I don`t think it will work out...
If you are going to go real fast an 8 point just is not enough for me,where as a halo would be a little to much for me because your vision is...
Drop spindles on the front is the only way to go,A freind of mine has done many pickups,chevelles,camaros as well as other cars.My race car has...
I think ladder bars are easier to set up & I have seen some very fast ladder bar cars that work great.
You can`t use cast gears on roller cams.
Yes I`ve also heard the professional products hurricane manifold( Vic Jr knockoff) runs lean on the outside cyls.
If you want to keep it,go to eastwood prdts & they make an excellent prdt called Metal to Metal.It is much better than JB weld & if applied...
I`m not a big fan of any tri y header especially if you are looking for HP,I`ve never seen a dyno article on any motor that showed they perform well.
Some of the 71 blks were made in Mexico & have bigger main caps that are a little stronger.If you get ARP bolts for the mains you would not have...
Cut out one round at a time if you go that route,personally I`d call AFCO & tell them what you have & let them recommend what you need.I`ve had my...
A Granada is a little bit bigger car,& it is wider,I would be surprised if it fit.
Make sure you have no intake air leaks anywhere,that will also cause your prob.
Very nice Cruz,I see you are using Cal-Tracs leaf springs too.I understand they work really good w/ the Rancho shocks.For the time being I`m just...
I had a 92 Lincoln w/ a 4.6,great mtr & never had a problem w/ it.However,Rob is right in that they are complex & the timing chain set up on them...
I don`t have much experience with drag radials but from what I understand you don`t do a very hard burn out,I think getting them to hot makes them...
Get the Rancho adjustable shocks from cal-trk,& when you go to the trk put some 90/10 on the front & take them off when you go home,I would not...
Separate names with a comma.
