[ATTACH] I had to grind some off of my spacer because on the pass side the belcrank/spring or rod rubbed on the spacer and could rub on manifold...
I agree 3 inch backspace is fine but if you have an 8 inch rim alot of wheel and tire are going to be hanging out.......kinda reminds me of the 70's
No More Than 4 inches of back space and preferablly 3 1/2 inches especially in the front
Sounds reasonable to me and they are pretty important parts
Depending on Price I would jump on them ...how much?
most late 60s and 70s ford midsize and compacts had them. I can look tomorrow and see if I dont have another set of four...........you might put...
how about a picture? it seems like your missing a part that goes in the wheel cylinder and pushes against the shoes
these are 11 inch disc with a 215/65R15 cooper gt on a 15 X 7 rim with a 4 inch back spacing and a 1/2 inch spacer to move the wheel out and gain...
Im not sure what the stock back spacing is but most wheels with up to 31/2 inch backspacing fit the front and up to 4 inch on the rear. this is...
Got the bolts for my belly bar, engine bar tubular crossmember what ever you call it from CJPony parts for 15.99 free shipping....part no. HW615...
yes....looks like I should have waited a week for them to go on sale
do you have a body ground ? ford grounded on the fender right by the battery and on the engine
where did you get the pivots they look very interesting. How much effort to turn it that way?
Just wanted to pass the word......just rehabed my front end and found ..... CJ's Pony Parts has the spring seat for the front of our car for 28.96...
purchased from estate sale wadsworth ohio
purchased off ebay from long island NY
when you see a tire size say its 255/60R15. 225 is the section width (the widest width dimension) in this case 255 multiply by a milli-meter...
Thats my opinion and rockauto would also be my choice although summit has been very competive with rocks prices on alot of items I purchased recently
all the way around ? or just in the rear? I have 100 miles on my coopers so far so good 255/60R15 on 8" wide rims rear and 215/65R15 on 7" rims...
also interesting to note I saved the "valve" off a 1970 I had and converted to disc and there was no safety spool it was just a distribution...
Separate names with a comma.
