I have the 3 1/2 aluminum ford racing drive shaft 45 1/2 in long center to center on the cups. It was in my maverick with c4 trans and 9 in...
Dart block, trick flow R 210 runner ,super victor,solid roller,950 quick fuel carb,13 to 1 compression.
Rick,I may have ask you before but what does your car run in the 1/4 mile @ what rpm,what size rear tire ?
I took the mav out for some shake down passes at our local 1/8 th mile track.Foot brake at 2500 it went 6.38@ 108 mph,trans brake@ 2500...
Bob,I have a RCI fuel cell like paul's and both baulk head fittings leaked on me, so I put a steel washer behind the nylon and it puts even...
rotorr22,Thanks,I got the heads off ebay, they were on a 331 twin turbo car and the port work was very good as you can see by the numbers. Ron...
Rick,It has a older set of twisted wedge R 206 intake runners that are now 210 , flowed 350@.700 had them flowed at FOX LAKE. Final numbers today...
Ray,A 8.2 dart block weighed 165 and a 9.5 SHP dart block weighed 205 and my old stock 89 gt block weighed 125 so I just added 80 lbs. to the...
Rick,It was a pro street car with sound deadner,full carpeted inside tubes and all with roll cage. Put my 418w on the dyno today , hope to get...
The car weighs 2900 with me in it with stock block 347 but will weigh 2980 with 418w dart block. Should make around 200 hp more than 347 did,I...
Is 2660 a good weight for a back half all steel mav ,glass hood only ?
race weight,Is 2660 lbs lite or just average for a back half mav with 14x32 slicks all steel ,factory glass and glass hood only?
Hi, Paul the cars looking good hope you get to here it fire up soon . Where leaving for florida in the morning,talk to you soon. Mark
Wind chill -16 the other day and had to work on my snow plow truck.I had the heater on for three hours in the garage ,it got up to 42 degree's. I...
Very nice job on the razed openings for the tail pipes,Iam a stickler for details.It's the little things that make a car stand out from the rest.
It would be great to get all the maverick/comet guy's from Ohio together at one track this summer just for fun ,keep up the good work the car...
Went to the shop the last two days,installed the crank scraper and oil pump and support bracket,oil pan studs.Took timing chain cover to get...
Hay, Paul the fuel cell's looking good, I wanted to work on mine but tempature has been in the 20's for two weeks , so I went to the machine shop...
Soumds like a realy nice low mileage cobra you have. Nothing to be impressed about,I just keep working on one project at a time and trying to get...
It was a 5000 stall speed when it was a 347 but I sold that engine so I could finish the 418.It had 5.38 gears with 14x32 slicks.I plan to change...
Separate names with a comma.
