You'll want something like this: https://www.summitracing.com/parts/tfs-2500100 I used these on my gt40 heads in my 78 f100
Yeah, don't go too big. For a budget build you can get a cheap seat of GT40 heads and buy the Comp Cams spring kit that allows like .530 lift and...
Dyno testing has shown to add a considerable torque down lown from long tube headers and a little bit of horsepower up top. Here is a link:...
Here is what worked and what didn't work. This is a 351w with a AJE K member and cut shock towers. Well I bought Doug's Tri-Ys 669y-r and they...
Agree with Craig 100%, I would just suggest big brakes.
Sell you mine for cheap if you haven't bought one yet, with the bolts...converted to a K member.
PM me, I have a set I will 100% never use. A hundo you said?
Mustang steve has a very nice brake conversion, you will need to switch to larger wheels. I did mine with 2014 mustang 13" rotors up front and...
Get a crate motor. For your goals I would not spend the money on all of that for almost stock hp. You will spend $1000 at the machine shop, 300...
Hey guys, any ideas in what headers will fit a 351w swap with an AJE K member? Built myself a 388w, dart block .060 over and 3.75 stroke, afr...
Hey guys, thinking about swapping my SBF 331 for a BBF 460, wondering about fitment. I have seen guys have done the 460 swap and am wondering...
Hey guys, I had a bad experience with a vendor and I don't know how to go about fixing it. I won't name the vendor because I don't want to blast...
I have my original 2 barrel that came from my V8 car...I rebuilt it and it ran great. Personally, I think a stock 302 does awesome with a Holley...
They are off right now because the engine is out and I am finishing up the AJE K member install. They will most likely be going back in...
I would stick with the stock manifolds. I know people will tell you all kinds of stuff, but at 325 hp you will not be leaving much on the table....
I can sell you my whole setup, it's got 500 miles on it. All stock with new bushings and all.
What kind of power are you making/looking to make? Those people must be using a rack and pinion steering system. You can open your stock...
The original pipe is 2" if I am not mistaken, i shoved a 2 1/4 over it and the bracket cannot be slid down. I will say this, the original pipe is...
Ummm, if you are getting hipo manifolds for the mustang then they will not fit your maverick. They hit the steering box and point out toward the...
Hey guys, well, I chopped my shock towers with an AJE kit and was going to put my 331 back in it, but then I scooped up an L92 with a 6l80e with...
Separate names with a comma.
