You want around .015 of the transfer slot showing on the secondary side. Only correct way to set it is with the carb off and looking at the slot...
How far to you have to turn the idle speed screw on the throttle primary linkage in to get it to idle? Are there holes drilled in the...
Video has nothing to do with a 650 Holley! I think you have a bad/dried bushing in the leaf spring eye or a frozen shock. It's mot a...
Give him the fast car and make him respect it. I had one when I was a kid, still do. Yes, he will probably get in trouble at some time with it...
Click on "Carb Numerical Listings" to see what original is on your carb. http://www.holley.com/TechService/Library.asp I wouldn't waste...
I've used the Quick Fuel metering block kits. Unless you have dyno access and can measure your A/F ratio and see what your power and fuel curves...
The balance tube tops go on when the carbs get rebuilt. This is just mock-up to be sure I could get all the linkage to work. Had to do some...
Do you realize how much work it is to put a 351C in a Maverick? Unless you are racing it, stick with a 289/302. SPark
This is an OEM system for a '63 Galaxie dual quad. The throttle linkage hooks to a bell crank bolted to the base of the rear carb, it then...
The 1850 is the list number for the old stand by 600 cfm vac secondary carb. Nothing fancy but easily tuned and a good match for a small block on...
The Holley 0-6619-1 is an early 1970's emmissions aftermarket replacement carb.It is a 4160 series that flows approx 600 CFM.These carbs have a...
I never worried about checking it so I didn't know that. I just put them on correct and forget about them. Nice tip to know. SPark
They both say "front" embossed on the head gasket. One gasket looks like it's right side up and the other will look upside down. If yours looked...
They bring $500 a pair really easily right now. The 15x3.5 and 15x4 are the worst to buy. These are 3.5 wide. Hard to spend that much on a wheel...
Here's what I got Sunday morning. The wheels are for the Maverick and the tires will probably end up on the Henry J. [IMG] Already have...
Picked them up this morning. Shelbyville, KY. A nice 17 hour round trip, most of the trip down was in thunderstorms and fairly heavy rains at...
Think I finally found my front wheels! Headed out at midnight tonight to be in Kentucky by 9:00 AM to pick up a set. I always like to touch before...
My wife calls them so ugly they are cute. SPark
Hon 450 you are right. Not going to sell. It's going back in the corner of the shop while I finish my '62 unibody short bed build. I passed...
Hate seeing them on cars. If you like the look put a blower on it. To me it screams "poser". Never been a fan of them but I do like the real...
Separate names with a comma.
