Remember, the umbers on a Ford part are not a part number, they are an engineering number. I know the more experienced around here know that but...
You need to make some decisions before anyone can help you, otherwise it's just a crap shoot. What is done to the engine? Decide on what...
Measure it first. The Boss 429 heads need at least 32" as a bare minimum between the shock towers to fit. 34" would be better....
I know people that have tried this for circle track racing and had very poor results. It's nearly impossible to keep a consistent mix. You will...
Definitely a fuelie motor, no fuel pump drive on the cam. Look at the bottom of the engine block, at the back, right along the pan rail for a...
If you want the best of both worlds, buy an aftermarket 8.2 deck block and build a 364"/302. After looking at my car with a 351W in it when I...
My old pickup sits all winter. I maybe start it a couple times a winter, maybe every 2 months. It always starts fine after sitting. If it's...
Are you really sure it's a 331? What is the stroke? That piston with a 5.155 rod and a little offset grinding would give you a 315. No to nitrous...
You need to focus, dude! SPark
Call my friend Doug. http://www.quickperformance.com/ He'll sell you what you need for your power level. SPark
When I bought mine, it had a 351W sitting in it. I'm going with a 351C for what I'm doing. After looking at both, and if I was going to drive it a...
Most race wheels on stock cars, dirt modifieds and others that use a stock style front stub, plus all NASCAR, ARCA, USAC and about any other...
The tranny fits in the tunnel fine. It's the shifter linkage that you have to watch out for. A Super Shifter/V-Gate/Ram Rod style shifter used a...
5 on 5.5 is a truck bolt pattern SPark
Look at my "Pro Stock" thread for some ideas on the tranny tunnel with a top loader. You might not have to do as much with a street shifter but a...
Real bad without shock tower mods. No room. Do a stroker 302 and get the HP and still have some room to work with. It's not easy working around a...
Got the scoop glassed in place from the bottom. put it upside down on a pair of saw horses and ground the edge of the hole to an exact fit for the...
Looks like grandpa fast-n-furious. Not a fan. SPark
In the rust belt we tend to save cars that sunshine people would consider parts cars. I went to Oklahoma for rust free but most won't travel that...
I always do the rated pan capacity + 1 quart for filter and passages. I have run race motors for over 25 years with that method. SPark
Separate names with a comma.
