I have an original 1970 Roush Racing SCCA/Trans AM block but it is a wet deck block. Don't think you will see many that want a dry deck block or...
4.) Yes. Shimming the spring seats to gain spec'd pressure at installed height across all springs is what I meant by "balancing." This process...
Can't tell much from your links again. One is the Pertronix site the other is the Pertronix on Summit's site. I like the Pertronix stuff, they are...
I get nothing but the Summit site from that link. Post the actual parts links, not the comparison link that's in your computer.
Don't put an HEI on it. Put a Pertronics on it. Much better piece and can still look stock and not like you glued a GM part on it. SPark
What in the world in "balancing" valve springs? Do you mean deburring the ends and "blueprinting" them? Never heard of a balanced valve spring....
Got my hood/hood scoop all trimmed, fitted and fiberglassed on the inside. SPark
Have him pull a spring and measure spring pressure at seat pressure and over the nose heights. Find out what the installed height was. That should...
My car has stock leafs under it in the stock location, that's how a Pro Stock was built in 1970. I would suggest getting a hold of whoever...
I know they have the correct stuff to do a suspension limiting system the Pro Stocks ran back then to save headers and pans. My guess is that...
Found a 15x3.5 wheel and got it bought......now all I need to do is find it's long lost brother so I have a set! Anyone that knows where there...
I just make them out of Masonite then transfer that to aluminum. [IMG] [IMG] I won't have a rear seat to contend with. They will also be...
Most 302's would be fine with a 600cfm carb. That is actually on the big side except at the upper ranges of RPM. Vacuum secondaries should be...
Amazes me how many people think if it has dual fuel lines going in it's a double pumper. See it all the time. Maybe someday they will learn, it's...
What do you plan to do with the car? Nobody can tell you which way to head with the engine unless they know what you want from it. You can get...
Same here. on a 351 Cleveland. SPark
Either the Mustang II or the neighborhood. SPark
Does the pan have a windage tray or horizontal baffles? If it has either, a stock stick will not work unless you make a hole in the trays to get...
Separate names with a comma.
