Hmm thanks y’all! I don’t seem to have a dryer. I’m going to work on plumbing one in once I reconnect the system.
I have factory AC but with an updated (r134a) compressor. Unlike a modern vehicle there is no dryer inline with the system. Has anyone put one in?...
Cool that helps. If I go all in with an MSD system including module and distributor, can I swap distributor gears and use my current one until I...
I haven't had the pleasure of having to deal with ignition systems very much. I know the basics (how distributor works, how points work, etc.)....
I will for the 351. My 302 is a non roller.
Great information, y'all. I watched that video and it was indeed useful. I agree that 185s seem the way to go with my end goal being a decent 351w...
If I were going to buy some aftermarket heads (partial to AFR) for my 306, are there any that would satisfy both my mild 306 (268h cam, Holley 600...
I'll close this discussion for now. I'm doing a complete about-face and dropped a good chunk of my budget on the RC-107 kit. I'm going to rehab...
I'll double check those! A larger setback is that the block I took to the machine shop is no good. The main caps don't match the motor and the...
Eagle confirmed I can get a replacement. The piston I definitely can’t. Machinist today said he’ll measure everything out and let me know what I...
Just $$$. About to drop some coin on heads and saving where I can but only if it makes sense. Not trying to make it prone to explosion by skimping.
I'm going to chat with the machinist today when I drop the block off. Before I buy anything I'm going to wait to make sure the inspection and...
What's the best way to drive in a new front cam bearing? Bearings 2-5 use the seat for #1 (and the plastic cone) to keep the tool aligned...
Yes it is
Well bad news. Upon closer inspection I noticed one of the rods is bent and there is some damage to the skirt of the piston. Doesn’t look to be...
Thanks for all that info Rick! Sorry I didn’t mean to imply I didn’t have a 302 block, just that I thought I was getting a stock 302 block and not...
I scored what I thought was a 302 roller block this morning and turns out it’s already been used as a 347. It’s already been bored and notched and...
Old parts. I sent them off to be rebuilt. The steering pump, control valve, and power cylinder. He did a great job!
Well I got it all started up after cleaning the carb and I’ve burned through it all. It’s not THAT old. Good knowledge for future!
I recently replaced all the PS components on my 72. Control valve, power cylinder, hoses, and pump. Now for some reason my steering wheel isn’t...
Separate names with a comma.
