Do you know what the part# is and where I could get a replacement. Would you happen to have a diagram of where it would be on the back of the panel.
I am having an issue with the fuel gauge on my '71 Comet. It started reading much lower that the amount of fuel I had in the tank. It would then...
Sorry for the novice question. Does the axle have to be pulled to have them pressed in. Or is there a tool that can do it while they are still on...
For 71 Gold's reply. This is for my 71 Comet. There are a couple of studs in the Autokrafters catalog and one in the AMK catalog. Seems we are...
I did get the Dorman stud Hotrock mentioned. But I can't get it to pull all the way in and seat. Does it need to be lubed to help it pull thru....
Got a broken when stud on the rear drum brakes. Got the stud out and went to 5 different part stores and none had the size I need. Can anyone tell...
Does anyone have the correct part# for the 2 speed wiper switch for a 1971 Comet. I am seeing Motorcraft D00Z-17A553-A (SW896) Not sure if this...
Thank Krazy Komet!!. The solenoid was the problem. Put a new one on this morning and I'm Willie Nelson. (On the road again....) By they way can...
Went out to start up the Comet today and the starter kept running on after the engine fired up. I turned the key to the off position and the...
OK. The diagram was right. It was read to me clockwise instead of counter clockwise, my fault. My firing order is 13726548. So that should make...
Sorry, Sorry,,,,,I knew that firing order didn't sound right as I was typing it. I had someone read off a drawn diagram to me and it was obviously...
I'm not sure what year the engine is. The guy I got the car from 9 years ago was only able to tell me it was a 302 HO block from Summit. But my...
Hi Guys, I have some distributor questions I'm hoping ya'll can clear up for me. I am running a 302 HO block with Ford GT40X aluminum heads,...
Hello Everyone, Are there any direct size replacement gauges made that will fit into a '71 cluster with no modifications other than wiring them...
Looks like I can only get 215/65/15 in the Cooper Cobra's here. That should be good right?
Hello, I am currently running 14x7 Cragar SS, 3.175mm offset, 4.125" backspacing, on all four tires size 225/70/R14. I have just enough room...
Thanks! Is there a specific torque recommended or as tight as I can get them. Is thread lock necessary?
I am going to take the engine fan off and do an electric fan. The engine fan is bolted thru the water pump pulley with long bolts. Once this is...
I've got wiring issues throughout the car. So instead of trying to track all of them down I am going to replace everything so no more worries. I'm...
I want to replace every wire in whole system including engine, interior, rear lights, etc.. Is there an already made harness out there that can do...
Separate names with a comma.
