Does the 70 pounds apply to the back bushing nut as well as the front one?
I know everyone may have different front end alignment specifications but can someone share what the Ford recommended specs are for our cars to be...
Looks like the replacement LCA arm bolts from AMK are 1/2 inch
So it sounds like I can change one strut rod at a time by only having to jack up the side I'm doing and putting on jack stand , not both sides at...
I do have the jack stands and was going to put them under the long frame area. Just didn't know if it was safe to put one side on a stand then...
Thanks so much!!
Does anyone know the torque specs on the outer nut on the strut rod bushings as well as the bolts holding the strut rod to the lower control arm?
Aplogies for the novice questions.......can I jack one side up and do one then jack the other side up or do both sides have to be off the ground....
Cool!! Thanks Craig!
I see where the 68-73 Mustang strut rods are direct bolt ins and can get the rods, nuts and bushings from Mustangs Unlimited. Anyone know where I...
Thanks for the advice. The ocassional knock been happening for a few months but we only take the car out once a week. The squeaking has been going...
Sounds reasonable. I think I'll give it a try. Since I'll probably have an alignment done afterwards I may do this in conjunction with some other...
Sounds like I'm going to replace the strut rod bushings to rubber. I've personally never done this before. Is it a doable job. I'd like to try....
So what is the rod from the lower control arm to the front cross member called. It seems the squeaking is coming from the part bolted thru the...
I looked a little further into the front suspension kit I di 7 years ago and it can with the upper and lower spring seats and midolyne strut rod...
It was my choice not to replace the spring perches. Guess that was a bad idea to save some $$. Looks like I'll do it now. Have not done the strut...
I put 1 inch lowering springs and new shocks on about 3 years ago but did not replace the upper or lower spring perches. I also put a whole new...
Sorry for not including that. I re-did the upper and lower control arms and the ball joints about 7 years ago with a kit from Laurel Mustang. The...
I am getting an occasional knock or pop in the drivers front when I have the wheel turned to the right and the car leans hard or goes over a bump....
Hello, From researching on this site I basically have the process to change the front shocks (never done this before on my own). I know you have...
Separate names with a comma.
