I'll post brake install pics when I get finished.. I had to replace the drum studs for the rotor to sit flush against the hub. I'm going to...
Due to the fact I'm trying to piece my own front suspension package together I'm getting a few issues that won't end. The source of the problem!...
I'll check the shops tomorrow till then I found this...
so go get 2/0 which is 2 awg wire from a welding supplier shop? Anyone know how many feet I'll need roughly. Best mounting location? I would...
Look at this awesome control upper control, hammered sooo smooth and flat :bwahaharoll: Should have no problem with clearance now. [IMG]...
This would get it done and seems for the price a great deal. ??:hmmm:...
hmm looks like I'm buying a used one then lol
Yes it's easy, I'll grab the colors later this week. The pairs differ for each seat. You only use 4 wires per chair. Both 10 awg wire and 2 of...
Ok before I go and purchase another pitman I'm toying of modifing my power one. The only difference between the manual and power pitman is the...
yes I need the wedge. :( When I drilled for the drop I used my friends shebly drop template from total control. Only after I drilled the holes...
final thougt, can I just cut the top off right above mid point then weld it back into place upside down?
can you tell where the wires go? If its to the coil, it could be the ballist resistor.
I plan to paint the back of the bullitt jet black, the face of the rim my metallic grey but with a little black stirred in, and finally the outer...
actually its mostly dead space in there. The ball joint is no where near there. I'm running the shelby wedge drop kit so it looks something like...
Yes I installed 98 ford lincoln mark VIII seats. I used the lincoln tracks with modding the front feet to fit perfect. The leather is nice and...
Would there be any harm in putting a small dimple into the top of the upper control above the ball joint. The dome above the ball joint strikes...
I'm running 05+ mustang 12.5 disc in the front and 98 explorer disc in the rear. So do I want the newer disc/drum valve installed or use my old...
depends on the piston valve reliefs in the motor. What year motor do you have? As mentioned before get the air gap its the best option. That cam...
Go for lincoln mark VIII seats! I scored a set at the auto yard and they look great in the car. Wiring is a breeze once you discovered which...
I've decided to use paintshop from duplicolor for my 71 maverick. The color is a medium metallic gray lacquer based paint. I can't decide on...
Separate names with a comma.
