Up until '67 Ford had the "Equa-lock" in its carriers. Later, the "Track-lock" came into the picture. The Track-lock is the better of the two,...
I sold mine for $250 to a guy that wanted to build a car for his granddaughter. 80k original miles. Eric
What spoiler?
That's okay, guys. Thanks much. I just checked last night and you can get the whole upper ball-joint assembly with new everything for $32. The...
Thanks groberts101. That link was very useful. I see I need to change a few things about my set-up. Damn. Should've thought this through a bit...
Or, do I have to buy the whole upper ball joint and lower control arm to get these replaced? I could just call them, but, around where I live,...
They're Keith Black .200 solid dome. Part # UEM-KB116-040 (KB116). [IMG] This is what I was afraid about most. I think I might have PTV...
New valve guides were installed, so, I think I ought to be ok there. However, I tried to measure a few valve springs for installed height and I...
Sure thing. The firing order only changes on the 5.0L H.O. factory roller blocks. Should've mentioned that, too. Also, I admire that you're...
Yes. The roller blocks have longer tappet bosses to accommodate the extra length the roller tip adds to the roller lifters. However, there are...
Hmmm... good news, maybe. It'd be cool if that's what happened. That little number "2" and some washed-out casting symbol of some kind in the...
Sorry for the double-post. Sure... but, these were all I could get before I just KNOCKED MY FRIGGIN' CAMERA OFF THE WORKBENCH!!! :banghead: This...
Thanks, SPark! I was just using the terminology my machinist used. He said to take my measurements and he'd give me whatever shims I needed. He...
Sweet! Just got back from the shop, again. Except this time, WITH MY HEADS!!! So, complete head specs: Aluminum Trick Flow knock-offs Staggered...
Okay, so I just got back from the machine shop about 20 minutes ago. 1.) These heads have no hardware. They're bare. I just ordered all new...
I wish I could tell you what they were. :huh: They have, absolutely, no markings on them. The cylinder head guy (Derrick) does nothing but head...
I need some input, guys. So, I have the opportunity to get a SMOKIN' deal on a set of aluminum heads. They're Trick Flow knock-off's, but, good...
Filled in side marker cut-outs, welded up firewall heater penetrations, patched old floor shifter penetration, finished setting up new 8" diff,...
Thanks for the feedback. This is a DD and I just want to get the stock suspension as responsive as possible without doing major parts swapping....
Barry Grant Speed Demon 575 w/ vacuum secondaries. Eric
Separate names with a comma.
