i have a '75 4 door with a 302. alum wheels, alum intake, iron heads, headers, spare tire, no a/c, no p/s. weighs 3245 lbs with about 1/2 tank...
i'd be happy with that, too. i'm assuming the package is that 75 comet with the 331 in your signature? fairly heavy car. maybe 3300 with the...
should be 28 spline in an 8" rear. stall will vary depending on the car setup such as rear gear, tires, weight, camshaft, torque, etc. the text...
probably street class. what is car equipped with? open headers or slicks (non DOT) usually moves you up to class 2 or whatever your track calls it.
if we put "snow" in front of it or "wood" after it would it be okay?
i lean toward ati and possibly coan. not cheap but arguably the best converters built on the matket, and they know how to set them up for your...
unibody. frame connectors that tie the front & rear subframes together. try a search for the specs on this board.
just checked my feedback list. i got it from them (dbelectrical) and everything went well.
i think thats where i got the one for my son's mav. working well & they were easy to deal with. no problems.
direction? nearest junkyard or ebay. some on ebay come with the switchover wiring that works on the mav. there is minor rewiring needed since the...
3000 chip would be a bit much. just drop the shift rpm by about 1000 rpm and put in a comparable rev limiter chip.
how often did you check/replace the rod bearings? i replace my rod bearings every 125-150 runs and have a little over 450 runs on a 408 on alky,...
take some timing out, reduce shift rpm, lower chip in rev limiter.
gas mig will look somewhat like that depending on the welders skill and material being welded. mine usually start to look like that about the...
stmanser - the ignition switch would do this, also ignition wiring. fords have 2 power circuits to the ignition. one functions in the run...
sorry. thought u meant the freeze plug hole. drain hole is usually 1/4 npt. try a cleanout tap and a new plug.
i think u will need the 3000 stall for performance. how about a cheap pair of short rear tires until u get the gears in? that would cut the 3.0...
not threaded. did u get out all of the old freeze plug? hole must be clean. go get a rubber expansion type plug u put it in the hole and...
often helps gas mileage slightly.
keeping the temp under 200 deg would be adviseable on the street. synthetics can go a little higher, i'm told. at the track it may go higher for...
Separate names with a comma.
