gauges You probably have a idiot light sending unit in the hole you need to use. If you don't want the light, just remove the sensor from the...
tubing copper works fine. Just have to make sure you havea gommet where it goes thru the firewall so it doesn't rub a hole in the tubing. Proplr...
Bbf A 460 weighs about 720# a 289/302 weighs about 465#. Now if you use alum heads and manifold a 460 looses about 100# right there. C-6 is about...
padding You might look at the 68-70 Stangs firewall pads. What I do is try and find the picture of a part, firewalls, and compare them. A lot of...
gears 8.8 & 9"
mounting Actually it does matter where they mount. Due to the forces applied to the mounting itself. On the back, you're pushing against the...
First make sure your timing is right. Then slowly adjust the idle screw at the base of the carb. Turn it in until it stumbles. Then turn it out,...
If it fits a 64 Stang, it should fit the Falcon, Check for those ones.
brakes After reviewing the kits, they don't say if you have to have disc spindles or not. Probably have to already??? Better check. There are two...
materials I hope you used a high quality steel for the plates. There's lots of force and stress put on that part of the system. They have to be...
flexiable Send it back, if you drill it to be able to mount it, you'll change the engines balance. That's why it's offset drilled.
changes Change the plugs and wires. Heat and age don't make them any better. Just as points get worn the minute you start the engine after a...
new toy Now is that seat NHRA approved? You know how they can be real picky about those things. Watch out for the neighbors. If one of them gets...
old school Dick Landy was old school. Wouldn't let alone use a computer if you gave it to him. Just as Dyno Don and Ronnie Sox that have gone...
Use a regulator set at 6 1/2PSI. Run a return line to the tank #4 or 6. It'll help keep the pump cooler and last longer.
shelby drop Been there, done that. Worked great on a 72 Grabber. I did the 66 Stang vision.
i already have a 4 brl carb and intake to go on it and am currently looking for early windsor heads 69-71 from the junk yard. engine. though what...
leaky Some of the blocks had blind holes like the head bolts and the later ones don't. Saves a few pennies during mnufacture and thos epennies...
diff Unless you need to drive the car, have it rebuilt. It fits and you your it works with the U joints you have now. Good time for a posi unit...
pressure and braking The long is the older style heavy duty with lots of spring pressure and will bend clutch linkage if it's not beefed up. Been...
Separate names with a comma.
