I have 14X7 on the front with 205/60R14,on the rear I have 15X10 with 26X10 M/T ET DRAGS
I have one '74 mav drag car (sorry guys, I sent one to the crusher last fall) TOTAL NOW =268
Well its been a long time since I was on here, a very busy summer,working and racing,and a slight vacation in the local detention center, 45 days...
you can also use any type of car wax just coat the quarter panel before the race and leave it on ,at the end of the day just rub it off it works...
Vally Racer, I'm using stock 50/50 shocks in the rear, I used to run air shocks but I changed them out last winter
thanks for tip on the AFB cleaver, I had heard somewhere about the secondary counter weights, I was thinking about drilling a few holes in them?...
I was using the factory duraspark dizzy with both vac. & mech. I'm heading for the track in about a 1/2 hr. I'm gonna try it with out the vac.
it is a strip only car, whats the best way to lockout the timing?
my cams powerband is 2800 to 4800, so I'm probably running out of it shifting at about 5200, I'm pulling about 13 in. of vac. at idle. never any...
timing is set at about 14, I'm thinking of changing it so I get about 40 total? does that sound about right for a sbf I've never done any jet...
my rear is a 4.62 with a mini spool, I only felt the car spin on one run, does not seem to be lugging,and it is pretty responsive and seems to...
heres my setup: 75' 302+.040 basiclly stock bottom end with a FMS windage tray wolverine 288 cam, dur. @50 = 218 ,intake centerline107,lobe...
Hello all, This week end was the first time I got to run my new setup, I was not real happy with the results, with all the work I did to my car...
shifting the C4 in my mustang did that I got a can of seafoam" Trans tune" I dumped half a can in drove it for a week then I dropped the pan and...
side scoop it almost looks like the side scoop from the old mercedes gullwing coupes
mav that 4dr frontend really looks like an AMC the 2dr frontend looks like the early 70's dodge colt
primer I don't have any primer, But Its flat black with lots of stickers, will this work??:D
heres the steps 1) jack up the rear of the car under the dfferential as high as you can , place some stands under the body, I suggest putting...
they kinda look like HP 289 manifolds
recall I have a 78 ford van with a C6 that did that,popped out of park and backed into a building across a parking lot, I'm glad no one was hurt.
Separate names with a comma.
