Dial 1 no other english message
mass backed carpet Good product. One would have to actually used both to have a valid opinion. I've gone with ACC, but don't really thinkany of...
couple of thoughts Macco- if you're just going to keep the car for a few years ..ok. If not then I would not recommend it. The costs later to...
clips You may have to pull a moulding and take one of the existing ones to someone who sells them in your area to match up. My local paint supply...
Has anyone had really good luck with re-chroming of the small front bumpers? Who did you use, what kind of pricing for a show chrome finish? Thanks!
Boss Hogg - TCI Bad experiences with both on a BB 428 application. ATI or Hughes IMO- few exrea bucks seems to do the job...
you have a timing issue for sure Forget the carb for now. Make sure the dizzy is in correctly and confirm ( through whatever method you like to...
new project Looks like a good start. I'm over in Stafford. Would like to see the progress as it comes along.
bowed?? Are you talking about with a load on them or when the tires are off the ground and just hanging? There should be just a very slight bow...
carb problems My advice would be to get a shop manual that covers your car and carb. That will tell you what your base carb adjustments/settings...
alignment What was the toe in set at? Either way, bad springs frt or rear can certianly affect handling.
gaskets I went with the cometics and studs, no problems since, even w/10 lbs boost.
Wiend/Holley Listen to Blown 5.0, he knows what to do. I have a Wiend. Holley boost referenced carb, Snow Performance water/met injection....
Sounds like a stripped steering box gear.. I have a complete p/s setup (used) available if he is interested , have him shoot me an e-mail or pm.
BUY A SHOP MANUAL.....thats what they're made for
backfire Most often a timing issue, but make sure the carb is right first. What kind of dizzy are you running?
bent pushrods Sam- if you multiple bent pushrods , then as noted before , you probably have the cam gear installed wrong. Pull the cam cover,...
Prostreet I'm with you...been looking without any luck, but love that bodystyle. Not as much as the Shelby...but close
what? Take it for an oil change???? Pull the plugs , clean em and regap, run all the old fuel out and off you go....after YOU change the oil.:)
changes Change out the rims for a set with the proper back spacing as already noted. Take the springs out and have them re-arched, about 40...
Separate names with a comma.
