hood Several things here to consider. And I am a 30 year bodyman by trade. that skin is buckled to the point that the metal is streched and will...
1 wirre I have a real nice chrome 100 amp one if you're interested..send a PM.
height You could also try some different shackels....until you make a spring change.
I'm with stepside I alos run this same set up with no problems stopping. pedal feels solid but not too touchy..
lowering blocks easiest,quickest and cleanest method IMO
roller bad dad So are non roller push rods shorter or longer than the 6.25s?
thanks all...I'll get to work !! nm....time to start shopping
noise Have a buddy block off the exhaust with a piece of wood/cardboard while its running and see if the noise gets worse. Mechanics stethascope...
What brand and size of fuel cells are you guys using, (those that have them) ? Any perticular brand better, easier to intall, etc? Looking for...
overkill Perhaps..but I would think that would have more to do with the cfm rating of the carb than anything else... jmo
I believe they do not run power valves for the secondaries and w/o the metering block you loose some tuneability. Why would you want to go to a...
short? You have a dead short somehwere, a nicked , or grounded (pinched) wire thats causing a short. Is this a ford part? Did it come with the...
stop Drill the pedal bracket from side to side and install a long hitch pin..??
guage pod- home made Guess you can tell, but it worked pretty good. Fabbed up from a piece of sheetmetal . made a crdboard template first....
flexplate Requires the spacer ring and also the correct length bolts. As noted before flywheels are thicker than a flexplate so bolts are longer....
shop manual A shop manual will give you the correct procedure for setting the vacumn advance. You can always drop back the initial 1 or 2* and...
interior Dido ! Looks really nice, especially the seats!
fan Fan was on the car when I got it. Single electric puller type, I did change to an aluminum 2 row big core radiator and added a separate trans...
blower I run a 174 and am very happy with it , especially because I can stick it under the hood with just standard 69/70 style factory scoop. As...
Mojo- frt springs were cut a half coil at a time, just to see how the ride and stance would be affected. Ended up with a bit more than 1 full coil...
Separate names with a comma.
