With 4.56s & a tire over 30 in tall once you get it dialed in,should go mid 9s if it hooks.4.22s & a shorter tire could also do it.I`m going to...
If you are going to use headers & you are pulling the mtr for a rebuild anyway,DO YOURSELF A FAVOR,& cut the towers.I`m sure someone makes the...
June 13 & 14 is the wknd scheduled,hope they have a good turnout,I really enjoyed myself last yr.Everyone get the word out & hope to see you there.
Yeah,if you have ever looked at the Nascar heads,they have smaller valves than you think they would & strange looking combustion chambers.I looked...
Look at what Craig Hedja`s Maverick (434 cleveland) is running w/ CHI heads in the Ozark Mountain Super Shifters,5.23 in the 1/8 mile,I think that...
I understand that they work pretty well making good power.However,most of the high HP guys I see at the track are using either Yates,Brodix,CHI,...
With that much flow those heads should make very good power.A high HP car that is a little heavier is a good thing for traction,also,on a windy...
Under NHRA rules you cannot have your windows darkly tinted.
I would use studs & put nuts w/ lock washers on,& use stainless steel ones,Then if you ever have to do it again,which you might because those...
My 70 model weighed 2505 totally gutted,10 point cage,steel headed 351w,c4 & a Moser 35 spline axeled rear w/ a glass hood,no lexan.I`ve since...
Nice car,hydraulic cam is definetly the way to go w/ out shock tower mods.
A trick to make sure your door will line up everytime is to drill 2 holes w/ a small bit through the hinges into the body before you remove...
If you can still get it ,try Pertronix ign. dist. & coil,cheaper than the MSD stuff & will do a good job on a mild mtr.
Yeah,if it is a Boss have fun shoe horning it in without shock tower mods,& headers,real fun.
Hi Jim,I`m up in Chesapeake Va. & get down that way once in a while.Keep an eye on Mooresville dragway,that is the home track for the Classic Gear...
Go to National Parts Depot & get pans for a 1967 Mustang,they work very well,that is what I used in my left front floor board.I believe that pan...
So true Robert,I remember when back in the day going to Rockingham NC every yr,there was a guy that came to those races everytime(pretty sure he...
Also if you are going to run a solid cam,run diesel oil such as Rotella or Delvac made by Mobil to have plenty of ZDDP in it for cam wear,I prefer...
Marvin McAffe out of california builds many race engines & he says anything over 60 psi is not needed & only robs HP.
You are already half way there,do the hd gaskets to or you might be kicking yourself.Aluminum expands 5 times faster than cast iron & your hd...
Separate names with a comma.
