Not the best picture, only one I took time to take though, more later. Gonna grab a disk brake set up outta some crown vics in about a week or...
Finally picked up the housing, started removing rust with a gel. It's late, gonna prime,paint, clear tomorrow afternoon \m/[ATTACH]
Know of any cars with 31 spline axles same length as ours? I'd like to avoid having to buy Currie cut-to-fit axles, to save some bucks, if possible.
The center was out of an 83 van, 31 spline. The rear axle housing is from a 57ish Ford, 28 spline axles. Gonna trade the 31 spline center for a 28...
[ATTACH] [ATTACH]cleaned up and painted, 3.50 geared
The shock towers are gone. Has a mustang II set welded in. Grabbing the rear end in about two weeks, doesn't have a pumpkin, but I nabbed one...
Been a while but here's some updates for anyone following. Picking up a set of Dove heads this month, gonna port/polish em shortly after. Will...
[ATTACH]
[ATTACH] When my comet had 302/C4, I ran hooker headers with glasspacks right off them. 6 Bolts. easy. Being equally tight on funds at the time,...
Good Evening all, So yep, I'm "working" on a 460 swap comet GT. Have had this car for years. used to be a 302/C4 car that I drove daily from...
Been there. You can buy the spectre POS kit sold at autozo**/pepfellows/oreally but you have to buy 2 of them to make one bulletproof version. The...
how intensive are the modifications?have you done it?has anyone?
So my dad is going to be picking up a maverick grabber this saturday and we found a 2.8l and a tk5 out of an 85 ranger and wanted to know if it...
Email sent
Sounds good so far,lets hope shipping isnt all that bad :p Thanks
how much for the stuff and shipping to 93307?
So if I were to get a center link for a 70-74 and a pittman from a 70-74 thy would match but not 70-74 center and 75-77 pittman?
So I can get by with just the centerlink and pitman arm?
I think I found a pittman on ebay and a idler on mustangs plus, now what centerlink should I get? I have no clue but don't want to spend a bunch,...
Hey guys, so the power steering slev unit drop bracket I bolted on a while back for the header install just crapped out on me, pulled the bolt...
Separate names with a comma.
