Another wiper question. I seem to remember a round grommet, very loose, that went through the cowl to help seal. There is also a gasket that goes...
Mine work, but they rattle, have slack in the joints, etc. I guess that should have been my first comment. Is there any way to quieten this down,...
Making progress on the car, the next step is all of the dashboard and related bits. My windshield wiper assembly is a little worn. Are there any...
I've never heard of anyone using that on anything other than head gaskets and header gaskets.
Let it get kind of firm, still tacky but won't string when you touch it. 15 minutes to a half hour, depending on the RTV and the temp.
Last time I used the rubber seal I never got the rear to quick leaking. Before that I used blue RTV alone, let it nearly dry before I put the...
I use RTV on mine. My first set of intake gaskets were wrong. There was no way they'd seal without the RTV. I also found the grey RTV to work...
Try a different music choice... Sorry. I had to.
Simple answer, fox body Mustang owners run C4 all the time. Aftermarket has the 157 tooth 50oz flywheels, as mentioned above.
I am curious about where the seam sealer works myself. I've had my old one completely apart. Looks like the seam sealer, for the most part, is...
I poured Rustoleum in my cowl and made sure to flip it around a bit before putting it back on the car. I'm sure that if you pulled the fenders...
I'm about 500 lower, but in the ballpark. Most stuff I've built was strictly street. A few for the strip, but not many.
If you can get in there it would be a good idea to file the edges flat again so a 3/8 line wrench will fit. You may not ever touch them again,...
I find they are best at pinching my hand when I can't get to the release.
Oh yea, they work when nothing else does, mostly just picking at you. Too many transmission, power steering, brake, fuel, etc, that I've worked...
Nooooooo!! Vise grips are evil!!
My dad's 312 (Yblock) had a knocking wrist pin. We were running it as little as possible when moving it. He finally said to hell with it, got a...
We're not that worried about being the fastest out there. We aren't, not even close. We are just trying to improve our own stuff, push the limits...
I think we'd all rather see it on a quarter mile track, but they don't seem too popular in Alabama. To be honest I really don't care if anyone...
400hp isn't a big deal. The car has a badass set of heads, a good intake, good carb, longtubes and the minimal exhaust, just enough pipe there...
Separate names with a comma.
