And why not rebuild it yourself if your going to have it out? Simple trans. Don't be scared of it. Lots of info online if you get lost. Cheap to...
If you put a convertor seal in it, be sure to pull the pump and replace the pump seal/gasket. I've chased that leak before. Had the trans out 3...
Might want to go so far as to chech the engines vacuum also. If you bumped the distributor or changed the carb settings, that would change the...
yes you can
If you want, I got a couple kids in the neiborhood that will drain the tank for you. I LOVE ELECTRICAL WORK! HATE REMOVING GAS TANKS!!!
You went far enough by grounding the sender wire and seeing the needle go up to full. If your ground is good at the tank, then the sender is bad....
Check the switches in the door. Then check the light switch. Not for sure, but a lot of those old light switches had a fuse on the top of them.
the speedo gear is matched to the rear end. So 2 different C4's from the same year car with different rear end gear ratios will have different...
Buy both and see whch one is the easier fix.
Speedo gearing works off the output shaft. The only thing that effects the gear ratio, is the output shaft speedo gear that is matched to your...
will a 302 bell housing bolt to a srod overdrive manual out of a 4 banger mustang?
Hand clutch like you have drawn would take way too much force to over come the pressure plate. It would have to use some thing to "boost" the hand...
Hey now! Watch what you say about the Duke and his work!
No, it's a170.
Not for sure yet. Will a 170 bolt up to a 4 cyl trans from an early 80's mustang cobra?
I have the small 6. 170 I think.
What bell housing pattern does a 70 6 cyl. have and will it work on 302's? Does any one know of a bell housing chart for ford?
Are they worth the trouble? Overdrive would be awesome on the parkway!
Is the 4 speed in an early 80's mustang cobra any count? It's a 4 banger turbo car. Would it hold to a mild 302?
Check the accelorator pump and the float level.
Separate names with a comma.
