I understand that, just appears that a D3DA-3590-AB is also a manual steering pitman arm along with the D0DA-3590-A. All I've found on a...
Couple of other things. The late model pitman arm with the ball joint obviously requires late model center link. It isn't difficult to find, I...
Attached are pictures of the hole in the dash, of which the white thing fits into, just tabs are broken off the white thing. Need a new one of...
Now you've got me worried I have the wrong pitman arm on the car and wasted $150... I don't mean to confuse you rammsrt, it sounds like you have...
So my 1972 Ford Maverick has a square hole in the dash on the passenger's side. There's also a broken piece of plastic, presumably for a light...
Loctite 592, or 567 is what I use, just depends on what the store has at the time. Never had an issue using sealant that wasn't rated for high temps.
For those of you that had severely rusted out floor pans, what'd you use, or what should I use to repair my pans where the seats mount to? Photos...
Has a new trunk gasket, still leaking :(
Yeah, photos are hard to take, let along my phone is crappy. Where's the seam sealer supposed to be? I don't see any seam sealer around my trunk...
So, been raining non-stop for the past couple of days, and finally stopped so had some time to work on the car, just to be accompanied by a couple...
Wow, everything really has been answered on this forum lol. Just purchased an arm stamped D3DA-3590-AB, taper is the correct orientation for...
Hedman 88660 modification to fit https://mmb.maverick.to/threads/351-headers.73129/ looks like a cheap option
So I was at the junkyard pulling a couple of parts off of a 5.0 explorer for my 351w and the exhaust manifolds caught my eye. Now the tubes look...
I did not know those would fit! Would be suffocating the 393ci motor, but I might just do that for the time being. Thanks for the tip!
So, looking for headers for my 351w in my 1972 Maverick. I know Crites are a good fit, but I contacted them months ago, got a quote of $600 w/...
Dang, I was just about to post this same question. Putting a 351w in my maverick, stock front suspension, w/ a windage tray and baffled oil pan....
3154tm: So your pan just had a closed boss for the dipstick tube that you drilled it out, and used a lokar dipstick like such?...
RMiller: My bad, the foxbody mustang is the waterpump I'm using right now, which has a clockwise rotation port, but counterclockwise rotation...
Krazy Comet: I know for a fact that my pump has a longer snout compared to the other reverse rotation pump, as I had purchased both, before...
The current 1986 or so Mustang water pump that is on the car is a clockwise rotation port but a reverse rotation pump. Problem is, is that the...
Separate names with a comma.
