Pics of my shock tower repair after the hole was drilled.. shelby drop and old holes plug welded. Weld on inside bottom of tower [IMG]...
Picture of 94-04 mustang bullitt 17x9 rims. The offset will require rolling the fender. From lip to lip measures 10"s so I'm good width 10" tread...
True but by todays standards those mods are hardly anything. Just cam, gears , exhaust.
polished 17x9 bullitts one day at 438...
would anyone be interested next time I see this on ebay to post here in the forums. AFS was selling four unfinished 17x9 rims for 288.88 plus 80...
more food for thought! The head rebuilder at the local speed machine shop has the old school build for killing cars. For under 1k of mods its a...
I just finished this mod without shortening the width of the axle. If you have any questions feel free to ask. As for tires the 05+ offset is...
did you see the bottom of that cuda! That has to be a Cuba body on a custom frame. Its a poser cuda just like a shebly kit car. Watch this...
Best way to get over 200mph with no modification and being able to drive it afterwards [IMG] Btw on top gear the 2009-2010 corvette can...
Well it turned into a project now. oneside has a pilot 1/8" hole the other has 1.3" hole... After seeing the hole I realize it was a bad idea. So...
hammered and drilled holes for grease zerts. only after noticing lots of blood on the uca I use for test fitting did I see the burr stickout!...
How big of a hole will I need to fit the tip of the grease gun through. I can install straight zerts then feed the tip of the grease gun through...
torch to heat it up then hammer away?
I thought only 73 and later mavericks had the shelby drop done! For reals the drop is already done!!! Anyway to confirm this from measuring frame...
The holes for the shelby drop are drilled 1.3" from center to center. The only way the UCA can be installed is with both side grease zerts...
Ok the 8.8 explorer rear is in so I test fitted the rear tires. Everything looks good except the axle itself seems more centered in the fender...
mark VIII seats Just installed mark VIII lincoln seats from a 98.(awesome bucket seats) ITS EASY except for the minor welding to create new feet...
According to Total Control the springs will only drop about 1/2". Course engine weight and options will also effect the drop height. So I'll...
I was about to buy the grab a trak 620 67 mustang springs for my maverick till I realized its a linear spring. TCP sells a progressive rate...
no shock towers means it was most likely a mustang II conversion. Plenty of stuff on this site for that mod.
Separate names with a comma.
