Trick of Treat!... Hello everyone.. Ive recently took my i6 200ci head in to get a valve job and while I have the time, I figured ill do some...
Great!... Thats what I thought, but every post Ive read about this never noted the screws.. I can only see the one on the drivers side and didnt...
I have the same problem.. In the lowest corner on the drivers side I can actually see a screw holding the trim on.. I have a good new (used)...
Sound like your not new to the site.. But :Welcome: to the forum
Mines also a Kali car.. Light surface rust on a few spots inside where water settled, on the body where the paint is SUPER faded and along the...
Ok.. Thank you everyone for the advice.. I going to order myself a full set of kyb's for x-mas...:thumbs2:...
LOL.. Well it will be one hellavah ride knowing we're all in danger!..:drive:.. What should I replace them with? And why would some spend there...
I was bleeding my brakes for the first time on the Mav today. And I noticed my rear shocks say "Hi Performance Air Adjustable".. I thought they...
What carb do you have? Check the fuel filter, lines & the choke adjustment.. I also have a 70 with a 200ci and holley 1940 carb.. It starts easy...
Damn, your the greatest.. Thanks... Imma run some test today using a jumper wire to see if the fan motor works or not.. I also have a vacuum gauge...
I found a posting for a 73 and up diagram, but the early Mav is different seeing it doesnt have an egr valve.. I have an inline 200 and need to...
I think I get it now!.. Seems to be hooked up right, I guess.. Its connected pretty much how the illustration of the pvs shows.. The TOP port of...
I read all that in one of my Maverick manual and really still dont fully understand it after reading it a dozen times( I mean the port valve)... I...
Hello everyone! I have a 200ci engine in my 70 Mav, with a holley 1940 carb that was already installed when I got the car.. Im not sure about...
Well, thanks guys.. you've all been very helpful...
Wow.. The fuel pump i have is rated from 2-4psi.. Its the autozone replacement pump for my engine, besides the mechanical fuel pump.. Is there...
I thought about getting a pressure regulator too... With a 1bbl holley carb what should the pressure be at? Thanks for the help
Hello again.. I have a 70 Mav with an inline 200cid .. Iv been thinking about where to start. So I figured removing everything not needed on the...
Found the window in town yesterday and just put it in.. Its from a 73 but fits like a glove... I also got a used 73 windshield and new gasket for...
I had the same problem.. I removed the speedo and worked my arm through the dash.. The vin in my 70 mav has a tag that can be completely remove by...
Separate names with a comma.
