No. The modulator gets vacuum from the intake, not the other way around.
Welcome Isaac. This may help http://www.1bad6t.com/Maverick/repair/exploded_views_electrical.html
You might run into problems with your headers and booster/mc. Although you gain a ton of room by losing the towers, the steering shaft angle...
I just finished installing the R&C kit and my mounts were already welded to the crossmember but as Frank said, I told them it was for a 351 when I...
At first I thought you were kidding then I saw you were not local and it is a real question. The Woodward Dream Cruise is this weekend. It is...
Got any pix?
Stephen, They are beautiful and I was going to get them in no matter what! It took some work to fit them with the R&C kit because of the steering...
Thanks for this sharing this upgrade. Does it matter where the 3 wires connect when adapting the pigtail or is it just basically as long as the 3...
Bob, Welcome from Metro Detroit area. You're in the right place, good and smart people here. Let me know if I can ever help. Regards, Joe
Jeff, Could it be that the 77 had power discs? I thought that the brake pedal went around the column left to angle the booster toward the motor...
Jack, Understood.Perhaps to prevent bleed on hills or inclines for instance? Without it car would still stop but for $20 I personally like the...
Jack, I respectfully disagree. The blue 2 lb valve is for disc applications, the red 10 lb valve is for drums (see wilwood.com). One could argue...
David, even if you don't choose the prop valve make sure you install the blue (2lb) residual valve in the rear
Mav and Comet have different grills just like hoods and bumpers. The Mav grill wouldn't look right because it doesn't have the "bulge" like the...
John, I sent you a PM. I need some 31 spline Versailles axels so maybe we can work something out. It might cost more to narrow your housing than...
Bronx, you don't have to ditch the leafs to get the rear up. Maybe you just need newer leafs. A lot of folks here are removing a leaf to get the...
Nice looking but stick out too far
Separate names with a comma.
