I work on a lot of both engines. West Texas has a lot ranches/ranchers. They both have some fundamental flaws. I personally would not own a diesel...
Ignition will operate without the computer at base timing(like the SPOUT bridge is removed) Two things I can think of to cause both problems at...
any system you feel you can handle putting on will be a vast improvement over points. I personally like the billet distributor option. Clean and...
Does it have the same tires that it sat on for a year? If so your problem is flat spots on tires and the must be replaced. A vibration from 30 on...
My Comet was my second car. I still owned my first car(Renault Alliance). When I got my third car(dodge Aspen) I had three. The Comet is still...
If you lean out the carb you might want to keep your current plug in there for a while and see how it burns.
I run the TFS heads with no real problems. I had to cut a small notch in my blow-proof bell housing. I use the Hooker 6901's.
There are too many variables to really say what the difference in mileage would be, if there even was one. In theory, the smaller carb would be...
Prebent tail pipes with a heat shield(or air gap/double wall) that would fit around the larger fuel tank would probably sell. Heck, I might even...
Got the same thing on mine and love it. A kit like that might make some money. Throw in some tail pipes that you could cut and weld to the center...
That's a good carb. Not too big good throttle response. For a stock motor that will only be street driven I'd only go 600cfm max. An edelbrock 500...
w/o air tools.....luck
Check the engine to body ground.usually right(pass) rear engine compartment off right side head. You could be forcing ground through the cooling...
ECM problems are VERY common on 80's caddies. Of course the GM ignition switch doesn't help anything either.
That's exactly what I thought. My shop charges the same as yours. Although I do r12 kind of...I use Freeze 12 but give no warranty.
Most pulleys will swap. Even different kinds/brands of cars use very similar alt shafts. Just check belt alignment.
Not really. It just adds reciprocating mass(bad). Atlanta must be like Albuquerque, NM. I lived out there for a year. Got passed on Menaul Blvd...
Stavro posted in the Off topic section looking for a car in Texas. He might want it.
Probably a warped head destroyed the head gasket to make the external leak. Then the head was removed and it finished the warping with no load....
Edelbrock(and some others I'm sure) makes an adapter that raises the air cleaner up(check hood clearance). I installed and Edelbrock 1406 just the...
Separate names with a comma.
