I have used ps fluid with no negative effects in a ford pump but generally favor using the type F ATF. Ron
I bought the Innova 3110 thinking I only needed one for OBDII. I wish now I had gotten at least a 3120 model as I find I'm needing one more and...
Type F ATF is what was used but power steering fluid will also work. Ron
Those hoses do a lot of flexing while enduring heat and pressure. Replacing both at the same time is a good idea. You might consider replacing the...
I tried the product from Alsa Corp called Killer Chrome. They make it look so easy in the demo. but no matter how I tried could not get it to look...
Just turning the wheels lock to lock a few times should expel all the air. I once had a piece of metal lodge in the overpressure valve in the...
Later ford engines use that hole for the smog pump. When the hole isn't needed for the smog pump a part called a Blind Hole Insert is installed...
The Pertronix will work with or without the resistor (pink) wire in circuit. Good thing you are using the Pert II with the Flamethrower coil....
Don't know anything about Second Strike. If it's a multi-strike unit then you get that as a part of the Pert III along with rev limiter. and it...
The Mustang still has it's original Pert I and going strong. Installed a Pert I in my current project and have since upgraded it to a Pert III....
If the dowel pin you are trying to remove is the shorter one then it must have had a 2 piece eccentric at one time. The pin can be stubborn to get...
The eccentric for a SBF is 2.513" X .945" whether 1 piece or 2 piece. Later engines use a 3/8" bolt. I think some earlier engines may have used a...
The second wire may be to turn on a low fuel light if there is one. RS
One and two piece eccentrics are both used in a 289/302. Same size OD. Don't know if they are the same size as Big blocks. R
Are you sure there is sufficient flud in the mc? Brake inings can be worn or wheel cylinders leaking.Any evidence of fluid running down the inside...
Try pumping it one time. If that helps then you know what to do in the future. Pumping it shoots a squirt of fuel into the intake which may help....
Sounds like the trans is what David Kees calls an 'Imposter Toploader'. Probably not a bad trans, just takes some alterations to fit. Does it...
That's quite the description of the trans. Doesn't tell me much. Is the 'bump' located on the right side about where the 3rd gear is on the...
Is that an SROD or the cast iron version that was used from 77 to 79? They have external linkage like early topoaders. Only the cast version can...
If the second port is on the side towards the dist it is the 'retard' port. You don't need to connect it to anything. But don't plug it as it...
Separate names with a comma.
